SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Part number for inner tie rod ends
I need to replace both my inner tie rod ends, and since the whole assembly is rusted solid I'm going to replace the outters while I'm at it.
I need the part number for the inner tie rod ends. I'm looking on subaruparts.com, and so far have found: 34141PA000 Tie Rod End right hand 34141PA010 Tie Rod End left hand 34140PA000 Tie Rod right hand 34140PA010 Tie Rod left hand The first two are the outters, and I think the second two are the inners. Is there any more to it than that? As I understand the diagram, the inners screw into the rack, and the outters screw onto the inners. Is this correct? There's nothing in between? Total subaruparts.com price: $172.06. If I ordered here I would be paying - get this - $139 each for inners, $129 each for outters. $540 total for 4 parts. Ya, right.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#2
|
||||
|
||||
It looks like...
The #'s on the subaruparts.com leave a little to be desired.
Maybe the first 2 #'s are the tie rods ends and the next 2 are for a rod that screws in. and maybe a greese boot like a kit?. Looks like that might be it. sorry can't help Keith Last edited by kwren; 04-28-2008 at 11:52 PM. |
#3
|
|||
|
|||
Thread Tools | |
Display Modes | |
|
|