The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > MOD Mania > Transmission and Drivetrain

Reply
 
Thread Tools Display Modes
  #1  
Old 11-15-2008, 02:15 PM
Sean486's Avatar
Sean486 Sean486 is offline
Happy SVX
Subaru Silver Contributor
 
Join Date: Jul 2005
Location: Mechanicsburg, PA
Posts: 3,406
Registered SVX
Having trouble with Power Mode Mode

I am trying to do the Power mode mod but I must be doing something wrong since I can not make the light come on.

The directions from Nomake Wan are pretty simple, plug a wire into the #4 and connect it to the diagnostic ground, once it lights up POWER mode then figure out where to run a switch.

The 1st surprise I had was that there are 3 wiring harnesses on the TCU. I was expecting only 1. I believe the one that you use is the lowest of the 3 and that the proper pin is the only open one on the locking clip side of the harness. At least that one looked like the picture (from what I could see laying upside down).

Next question is the wire. I was using a 18 gauge solid wire. Should I be using a braided wire like speaker wire? Also is there some trick to keeping it in place on the harness? It didn't feel like it was real secure in there.

My feeling is that I have the right pin, but maybe the wire I am using is the problem. Either it is not right for the job or is too loose in the harness.

Anyways, any help would be appreciated.
__________________
1992 LSL ebony pearl 170k - Thank you Ron Mummert
Reading Box of Wine Car
-----------------------------------
1992 SVX LSL 5-Speed Sold at 180K 2019
1995 SVX Lsi Polo Sold at 118K 2007
Reply With Quote
  #2  
Old 11-15-2008, 03:40 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: Having trouble with Power Mode Mode

The light should come on when you put it in drive, does it? Check that first then make sure you put the wire into the tcu plug deep into it so it has contact.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122