Small Car Shift Kit

michael · #1 08-02-2003, 11:50 PM

HERE IS A PIC OF MY SHIFT KIT INSTALL LET ME KNOW IF IT'S CORRECT I WASN'T SURE ABOUT WHAT PRONGS TO USE. SAVE THE PIC IF YOU LIKE. IF IT NEEDS TO BE CHANGED TELL ME AND BY THE WAY IT'S SHIFTING GREAT.

Landshark · #2 08-03-2003, 04:50 AM

damn - nice picture! cool avatar, too (why didn't i think of that?)

now turn off your caps lock.

Roughgem · #3 09-09-2003, 09:06 PM

Michael, I purchased a shift kit several months ago before the kit included the resister. I bought a 680 ohm resister and placed in a configuration such as you did in your diagram. Now I get 16 blinks with the power light. I went into the diagnostic mode and got code 11. I disconnected the battery for a bit and once reconnected it seemed to fix the power light blink, but then this morning I started up and the 16 blinks of the old power light were back. Now I've removed the 680 ohm resister but of course no change in the 16 blinks. Any suggestions on what I should do now?
Thanks

David

#4 09-10-2003, 12:13 AM

now We will just need a Resisitor Crush Mod for it and were good to go hehe.