SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#16
|
||||
|
||||
Re: eg33 swap wont rev
uhhhhhg, so i swapped the 2 wires to my ignition module, it was worse
so my wiring on that was already in correct place and the fsm has the colors wrong then, messed with the wiring to maf some more, any other way than 1 (which i believe to be correct) it wont even stay idling, so she runs at 1000rpm..... just sits there and i can feel a slight knock/misfire but still with any gas she ****s on me. maby i do need to hookup some 02's and let it sit for a bit. also i dont have the svx injectors installed, i used the ej25d legacy red injectors. |
#17
|
||||
|
||||
Re: eg33 swap wont rev
Quote:
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#18
|
||||
|
||||
Re: eg33 swap wont rev
yeah the ej25d injectors are also red, both are 270cc i believe
(didnt have svx injectors) |
#19
|
||||
|
||||
Re: eg33 swap wont rev
Quote:
Is your 3.3 a turbo? Or does that come later? Have you had the engine apart? If so to what extent?
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link Last edited by svxfiles; 11-15-2010 at 09:40 PM. |
#20
|
||||
|
||||
Re: eg33 swap wont rev
ahhh yes, thats right i knew it was one of the two
|
#21
|
||||
|
||||
Re: eg33 swap wont rev
Yeh, vintage thread, but it's the only one I found with mention of my topic and it's pertinent to this one.
Does our EG33 actually have a RECIRC GAS TEMP SENSOR? Contrary to the FSM (which is alllllllllways accurate ), the "upper" engine harness (mounted to the bottom of the intake manifold) doesn't seem to support one!
__________________
Disclaimer: The above post is on the internet. |
#22
|
||||
|
||||
Re: eg33 swap wont rev
Per <this Emission and Vac pdf>, it's California only.
__________________
Disclaimer: The above post is on the internet. |
|
|