The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > General SVX Babble

Reply
 
Thread Tools Display Modes
  #1  
Old 09-28-2009, 04:21 PM
Jvan Jvan is offline
Registered User
 
Join Date: Oct 2003
Location: Chappaqua,NY
Posts: 461
Question replace plastic lever for remore trunk release

The top of the plastic lever cover broke so that it can't hold the cable to release the trunk lock. I have an entire remote trunk/gas door unit and I had planned on replacing the entire unit. However, I think I can just remove the plastic lever from the new unit and install the old cable into the new lever. Does anyone know how to remove the plastic lever? Does it just snap onto the metal swing arm? I don't want to break the new plastic lever just trying to prying it w/knowing what I'm doing.
Reply With Quote
  #2  
Old 09-28-2009, 05:09 PM
kwren's Avatar
kwren kwren is offline
Registered User
 
Join Date: Aug 2006
Location: washington state
Posts: 3,499
Re: replace plastic lever for remore trunk release

just pull it off

Keith
Reply With Quote
  #3  
Old 09-28-2009, 05:50 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: replace plastic lever for remore trunk release

You can't just pull it off, their is a small allen head bolt on the underside of the lever.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
  #4  
Old 09-28-2009, 09:20 PM
Johnybeas Johnybeas is offline
Banned
 
Join Date: Aug 2005
Location: Sandy,UT/ Daytona Beach, FL
Posts: 1,712
Send a message via AIM to Johnybeas Send a message via MSN to Johnybeas Send a message via Yahoo to Johnybeas Send a message via Skype™ to Johnybeas
Registered SVX
Re: replace plastic lever for remore trunk release

mine just pulled off on my 92...
Reply With Quote
  #5  
Old 09-28-2009, 09:32 PM
Jvan Jvan is offline
Registered User
 
Join Date: Oct 2003
Location: Chappaqua,NY
Posts: 461
Re: replace plastic lever for remore trunk release

Iy doesn't just pull off. I tried that first because the plastic cover for the gas door did just pull off. I'll look for the allen screw but I didn't see when I first looked. I though that it might just have some type of clip that needed to be released.
Reply With Quote
  #6  
Old 09-28-2009, 10:11 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
Re: replace plastic lever for remore trunk release

.

It looks like it just pulls off. I don't see a reference for a screw.


......




,
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.
Reply With Quote
  #7  
Old 09-28-2009, 10:11 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
Re: replace plastic lever for remore trunk release

.

It looks like it just pulls off. I don't see a reference for a screw.



......




,
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.
Reply With Quote
  #8  
Old 09-28-2009, 11:59 PM
Johnybeas Johnybeas is offline
Banned
 
Join Date: Aug 2005
Location: Sandy,UT/ Daytona Beach, FL
Posts: 1,712
Send a message via AIM to Johnybeas Send a message via MSN to Johnybeas Send a message via Yahoo to Johnybeas Send a message via Skype™ to Johnybeas
Registered SVX
Re: replace plastic lever for remore trunk release

ya I've taken mine off a few times, it didn't ever have a screw or anything only screws were to hold the outside part to the car not the actual tabs. Those are located one under the lever and one inside a little covered compartment on the back you get to by popping off the cover with a flathead. maybe they changed it in later years.... speaking of these though I lost the little one anyone have an extra? I might just go to a junk yard and grab one.
Reply With Quote
  #9  
Old 09-29-2009, 02:28 AM
1986nate 1986nate is offline
Senior Member
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Meadville, PA-but I'll still travel
Posts: 4,672
Registered SVX
Re: replace plastic lever for remore trunk release

Quote:
Originally Posted by Johnybeas View Post
ya I've taken mine off a few times, it didn't ever have a screw or anything only screws were to hold the outside part to the car not the actual tabs. Those are located one under the lever and one inside a little covered compartment on the back you get to by popping off the cover with a flathead. maybe they changed it in later years.... speaking of these though I lost the little one anyone have an extra? I might just go to a junk yard and grab one.
I have a full extra assembly, what exactly do you need?
Reply With Quote
  #10  
Old 09-29-2009, 10:46 AM
Jvan Jvan is offline
Registered User
 
Join Date: Oct 2003
Location: Chappaqua,NY
Posts: 461
Re: replace plastic lever for remore trunk release

I didn't see any screw but it doesn't just pull off. There must be a clip that is holding the plastic but I don't see where to pry it up to release the plastic. The gas door plastic did just slid off but I slid it back on and it also is now unmovable so there must be some thing holding them. I will have an extra gray gas door handle when I'm finished which you are welcome to.
Reply With Quote
  #11  
Old 09-29-2009, 08:22 PM
kwren's Avatar
kwren kwren is offline
Registered User
 
Join Date: Aug 2006
Location: washington state
Posts: 3,499
Re: replace plastic lever for remore trunk release

Quote:
Originally Posted by Johnybeas View Post
mine just pulled off on my 92...
mine 2................
Reply With Quote
  #12  
Old 09-30-2009, 04:15 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: replace plastic lever for remore trunk release

I don't know if they changed it during the years but mine has a very tiny allenhead on both the trunk and fuel lever on the bottom most part of the handle. It's really hard to see.
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122