Bad news!!!

[hexadec0079]

Another eg33 taken for the Impreza side.....

http://forums.nasioc.com/forums/show....php?t=1094418

-Enjoy

[-JJ-]

This is not bad news at all, this is the long awaited rigoli eg33 build, this is fantastic news, check out the video, reverse mounted intake complete with both throttle bodies, go the Aussies , this is finaly hard evidence that the eg33 can achieve what we all believe it could!

Cheers,
Jake

[TomsSVX]

I could use some of those pistons and lower end components... Please?? Maybe some specs for the cam profiles??? Maybe a source for some pieces on how they tend on holding that block together under 40psi??

Tom

[SilverSpear]

Originally Posted by TomsSVX

Maybe a source for some pieces on how they tend on holding that block together under 40psi??

Tom

Closed deck engine to begin with...

[GreenMarine]

Originally Posted by TomsSVX

I could use some of those pistons and lower end components... Please?? Maybe some specs for the cam profiles??? Maybe a source for some pieces on how they tend on holding that block together under 40psi??

Tom

Tom, I can promise you that that engine is about 99% built... Nothing inside it (or on it), other than possibly the intake manifold, is "Subaru"... They are holding it together by changing it from an open deck (stock engine) to a closed deck... All the internals are probably titanium...

DeadboltSpeed is doing the exact same thing with the engine that I sold them...

[TomsSVX]

well ask hom how much this is costin when u get a chance. I will be doing a semi-full engine build in the future

Tom