help still no taillights

poweredx2 · #1 08-10-2006, 11:31 AM

Is it possible to burn out a switch by turn it on and the two fuses for that circuit is out,the switch was on for a moment but no park lights until I REALIZE i had pulled the fuses,after replacing the fusesthe switch never came back on,please help before I TRDE MY CAR IN FOR A NEW CIVIC SI,IT SO DIFFICULT TO GET SIMPLE PARTS FOR THE CAR.

Earthworm · #2 08-10-2006, 11:42 AM

Check if those fuses are still good.

poweredx2 · #3 08-10-2006, 12:37 PM

Fuses are ok,subyparts told me they can get me another but it will take three weeks,I am going to try to find a way to have that freakin switched bypassed,if not I going to sell not just because of the switch just because patrs are so hard to come by.I will call subyparts back tomorrow to let them know that if I WANT THE PATR OR A REFUND.

poweredx2 · #4 08-10-2006, 12:41 PM

Also I had to repair the rear of my fuse box last year where my power wire had chafed the covering off andf melted a circuit so I will chEck everything out.

poweredx2 · #5 08-10-2006, 01:24 PM

BAMMM I have lights,I BYPASSED the switch,I'll explain which two wires too connect,downside is I think that the parklights is on now with the ignition,I can only control the headlights,give me about 48hrs to make sure nothing burns up and I'll explain which to wires to connect to have permanent running parklights,hopefully this will work parklights on when the ignition is on is cool with me if it works give me 48hrs and I'll holla back.