Memory dump of ECU

[b3lha]

Originally Posted by TomsSVX

Phil, wondering if you had some insight on the following things

Injector voltage correction time @ the following voltages
10.0v
10.3v
10.7v
11.0v
11.3v
11.7v
12.0v
12.3v
12.7v
13.0v
13.3v
13.7v
14.0v
14.3v
14.7v
15.0v

I know this is stuffed into the ECU's programming, I am just wondering if you have found it.

Also wondering if you have stumbled over the water temp correction maps?Cold start phasing?Cold start Primer?

The voltage correction time is crucial to my writing the base maps to the Nemesis. There is a VERY lengthy and boring procedure that I can do to get the correct values but i would love to avoid them if you have the data already

Tom

Sorry Tom,
I've only just seen this. I assume from your other thread that you've got all this figured out now?
I can see dozens of different maps in the ECU, the difficulty is in knowing what they represent.