SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
|||
|
|||
move the seats and rails back _l---> _l
OK next question...
I am a tall guy, 6'4" maybe 6'5" I have removed the rear seats and have a plan to make that look better then then bare metal, but I want to move my seats back so that my legs ( they are long) have more room. So I start... How do I remove the seat from the rail ( I have the electro seats)? next is their any special way to relocate the rails back or is it just drill the hole and screw in the rail in the new location? Thanks for any help I may get.
__________________
-Chris '94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc. |
#2
|
|||
|
|||
Move seats
I don't know if anyone has done this, you could try to search, but it's primitive and often misses the good stuff.
Definitely can't just drill new holes and put screws in, this would be extremely unsafe. I have had the seats out and had a good look. Seems you could cut off the mounting brackets weld them onto a stout piece of stock that extended back further than the brackets mount. Then weld the seat onto the extension. OTOH, it maybe easier to make up some extensions that mount to the regular mounting locations on the car in the front of the extension and to the seat in the rear of the extension. Good Luck. I'm sure we'd all love to hear how it works out. |
#3
|
||||
|
||||
It may be easier to have a short section removed from your legs.
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#4
|
|||
|
|||
nah, I asked a surgeon about cutting a foot off my legs but that came to a couple thousand with relocating my feet and all. Too bad too, I mean being 5'4" might have been fun.
the weld would be easy, the seats off is the part I am having a problem with ( I dont want to ruin them) Thanks
__________________
-Chris '94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc. |
#5
|
||||
|
||||
To remove the seat, first move it forward, pop the covers at the end of the rails if they're still and remove three 14mm headed bolts. One on each rail going into the floor and one going into the side of the tunnel. Then slide the seat the whole way to the rear, remove the covers and two 14mm bolts that hold the front of the rails to the floor. Then fold the seat, like you were letting someone in the back, then tilt the entire seat to the rear and disconnect the two wiring harnesses.
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#6
|
|||
|
|||
Cool! Thx!
__________________
-Chris '94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc. |
#7
|
||||
|
||||
Not trying to insult your intelligence but have you maximized your adjustments? I'm 6'4" and have no problems, in fact I find it quite roomy. Is it your steering wheel that's bothering you or the dead pedal? Before you go chopping up your seat It's Just Eric has some for $20 that you should get for spare parts. Good luck.
__________________
"The things you own end up owning you. It's only after you lose everything that you're free to do anything." 92 Pearl White Ls-l (138k) Euro Headlights & Blinkers, 97 Grill, Euro Tail Lights, SS Brake Lines, Stebro Exhaust, Slotted Rotors, Classic Registration 96 Legacy Outback (206k) 5-speed 2.2 Lightweight Crank Pulley, Group N Trans & Motor Mounts SOLD Wanted: Steering Wheel |
#8
|
|||
|
|||
the way my legs sit in the car are bent to either side like I am in a go cart, yes I have checked that the seat is all the way back ( Dont worry I used to work IT and the first question is, is the computer on?) OK so, so far the bracket wins, cool.
__________________
-Chris '94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc. |
#9
|
||||
|
||||
Quote:
You've tried the "up-down" adjustment that uses the latch at the bottom center of the steering column? -Bill
__________________
Retired NASA Rocket Scientist Most famous NASA "Child" - OSIRIS-REx delivered samples from asteroid BENNU to Earth in Sept. 2023 Center Network Member #989 '92 Fully caged, 5 speed, waiting for its fully built EG33 '92 "Test Mule", 4:44 Auto, JDM 4:44 Rear Diff with Mech LSD, Tuned headers, Full one-off suspension '92(?) Laguna, 6 spd and other stuff (still at OT's place) My Locker |
#10
|
||||
|
||||
Just wondering. Have you adjusted the hidden tilt steering paddle under the steering column? I get that go-cart feel when the steering wheel is to low. When I first bought my car, I only saw the "lift" lever on the side of the column.
|
#11
|
||||
|
||||
Also it may help to adjust the hight of the seat. I find if you drop the rump portion it allows you to stretch out some more. Do you have any quarters jammed in the rails?
__________________
"The things you own end up owning you. It's only after you lose everything that you're free to do anything." 92 Pearl White Ls-l (138k) Euro Headlights & Blinkers, 97 Grill, Euro Tail Lights, SS Brake Lines, Stebro Exhaust, Slotted Rotors, Classic Registration 96 Legacy Outback (206k) 5-speed 2.2 Lightweight Crank Pulley, Group N Trans & Motor Mounts SOLD Wanted: Steering Wheel |
#12
|
||||
|
||||
Seat Belts
Relocating the seat will also cause a problem with seat belt location and attachment. That would be more important to me than anchoring the seat at a new location.
Lee
__________________
SVXx2 92 SVX LS-L Silver 92 SVX LS-L Burgundy (structurally challenged with 2792 miles) 96 SVX LSi Red 92 SVX LS Pearl (Parts) 01 F150 4X4 Red (+6 with other members of the family) FREEDOM IS NOT FREE |
|
|