SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Both front accels just died.
Hello guys!
Yesterday, I broke both of my front accels.. I was driving the car since about 2000km with them making a funny noise.. Wathever, I drove the car as RWD when engaging the AWD all the way to my CV specialist. (Not really good for the car, I know but really fun..) Now the car runs perfectly... but one of the accel cut the driver side ABS wire when popping out. The one that goes from the computer to the driver side brake. All in all, I'm looking for a used one and I want to know if I can change it simply by removing the wheel. Is that a 2feets wire or it goes all the way to the computer. by the way, is someone know if I'll need a special tool to remove the wire? Many thanks guys!! |
#2
|
||||
|
||||
The wire goes through the inner fender, and there is a connector in the engine bay.
Which side do you need, I may have one...
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#3
|
||||
|
||||
Thanks for the reply.
I need the driver side cable... PM me you price and I'll check that out. Thanks! |
#4
|
|||
|
|||
You can't just fix the wire? Heat shrink and solder? I bet that would be the cheaper route. $0.02
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin blk 92' LSL w/ average mods pics here http://s306.photobucket.com/albums/nn277/yourconfused/ Cash68: "Hmm, I wouldn't brag about beating Escorts. That's like saying you tricked a retarded person." |
#5
|
||||
|
||||
That's what I was thinking at first. But the wire seems to be OEM twisted and it looks like a big gage... It would be pretty hard to weld.
I will check that out tomorrow. Do you have any pics of the wire you have? Thanks! |
Thread Tools | |
Display Modes | |
|
|