SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Flushing the coolant
I want to put one of those flush kits on my car but not sure which hose to use. Do I use one of the hoses coming out the firewall drivers side passenger side, one has a arrow pointing out and the others arrow points in. If these are the hoses does it matter which one I use the one on the drivers side has more room.
|
#2
|
|||
|
|||
I believe these kits just use the hoses that are on the radiator. One on top, one on the bottom.
Dave |
#3
|
||||
|
||||
I had one of these on my wagon - it used the heater core hose though - the smaller ones that go into the firewall. I can't remember the logic used to determine which hose to use (in or out) but it was written on the package.
__________________
Matt Locker Link 2015 BRZ Limited 6MT 92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting 92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles 19 Subaru Ascent Premium - -Hers !. 89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P. |
Thread Tools | |
Display Modes | |
|
|