SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Engine block plastic parts (p/n required)
I am looking for the plastic pieces that locate on the block and hold in place the HT leads down the length of the block, mine are shot & 1 is missing.
Each have "C" shapes in order that the HT leads slide & get held in place - side by side along block length. Each plastic piece has 2 location pins, that clip into the block. The ones between 1 & 3 / 2 & 4 mount flush to the block. The ones that are at side/rear behind 5 & 6 have a bevel in order to aid with directing the HT leads from the side to the rear of motor. Part numbers & availability would be great to know - my part manuals are currently boxed in a storage unit. Thanks Steve (in New Zealand)
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#2
|
||||
|
||||
Re: Engine block plastic parts (p/n required)
ignore the previous post - I got the pieces from www.zebraupickcarparts.co.nz - there was a 92 that looked in really great shape - no rust that I could tell?.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#3
|
|||
|
|||
Re: Engine block plastic parts (p/n required)
When you say "HT" are you referring to the coil pack wires?
|
#4
|
||||
|
||||
Re: Engine block plastic parts (p/n required)
Opposed forces in addition to the factory manuals are a great resource for part numbers.
http://opposedforces.com/parts/svx/
__________________
1994 SVX LSi JDM Tailbar and Grill, Clear Corners, 15min-mod, Nevin Blue RSB, G-FORCE SPORT COMP-2 Tires, Phenolic Spacers (Manifold & Throttle Body), SS Brake Lines, Maniac Electric Motors 160A Alternator 2008 Legacy 3.0R |
#5
|
||||
|
||||
Re: Engine block plastic parts (p/n required)
Yes sorry that is what I meant = coil pack wires.
Would still like to know p/n.. TIA
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#6
|
|||
|
|||
Re: Engine block plastic parts (p/n required)
Although I am not much help, I too would like the p/n's. I installed all new coil packs and through the purchase process was unable to find the coil pack wire place holders. Perhaps they are only available in the engine seal kit?
|
#7
|
||||
|
||||
Re: Engine block plastic parts (p/n required)
From the factory parts catalog:
Clip No. 4 - 24233 AA330 - drivers and pass sides Clip No. 4 - 24233 AA340 - pass. side rear |
#8
|
||||
|
||||
Re: Engine block plastic parts (p/n required)
So you are saying that there are 3 required in total ?
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
#9
|
||||
|
||||
Re: Engine block plastic parts (p/n required)
Part number 24233AA340 (pass. side rear) is now NLA.
__________________
Sam Brilliant Red 95 SVX L AWD 149K miles - #904/1801, 08 STI 6MT with DCCD & VSS, ACT SB10 HDSS, 6MT bushings, DW200 Fuel pump, 17x7.5 VX-SCYTHE Wheels, 17x8 BBS STI Wheels,PERRIN CRANK PULLEY, 911 Turbo oil filter,$15/15min MOD & $20/20min Mod, Brontrager WORKS 22mm RSB w/ QS component endlinks, SS Brake Lines, DDM TUNING 6000K HID LOWS, Hella Optilux Extreme Yellow Fog Lights,Window scratcher fix, JDM Clear Corners My Locker |
#10
|
|||
|
|||
Re: Engine block plastic parts (p/n required)
What about the other one?
|
#11
|
||||
|
||||
Re: Engine block plastic parts (p/n required)
Make your own out of 1/2" thick nylon? (The upper clip mounting holes are actually metric threaded.)
__________________
"Peace is the flower of justice." Last edited by gwynethh; 04-01-2017 at 11:47 AM. |
|
|