The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > General SVX Babble

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2014, 03:01 PM
NiftySVX NiftySVX is offline
Registered User
 
Join Date: Sep 2002
Location: Oklahoma City, Oklahoma
Posts: 836
Send a message via AIM to NiftySVX
JDM RHD front clip part out

Hello everyone.

Some of you may know that I have been seeking a VTD trans for my SVX. Well, they are kinda hard to find. So I bought a whole front clip. I have extended myself financially a bit on it, so I need to sell what I can. Not an emergency, but I would love to get as much sold as I can because the thing will be sitting outside.

It appears to be a 92 JDM version E RHD car. It was the 3 tone silver. Transmission and related goodies are mine of course. boxer cover is promised already.

Engine is known good, I have seen a video of it running. I am more than willing to sell the engine with the harness and ECU. I would like to sell it that way because once the engine is gone the harness and ECU are useless in a US car. (142,000kms)

It has the JDM steering wheel. It also has the JDM mirror switch with folding button but no mirrors. All of the under dash electronics are there, including JDM climate control panel and amplifier.

Has city light equipped headlamps and the corner lenses from japan. These appear fine but will need polishing as per usual. I may also keep these if they don't fetch much.

I also am getting a JDM wing and the finisher lamp that says "alcyone SVX" I am entertaining the idea of selling those but it depends on what people want to pay. Those two items will probably go to the highest bidder.

If anyone has any desire for anything please post in the thread (do not PM me) and once I get the thing I will examine those parts and we can discuss pricing and such.

Keep in mind this is a front clip so it was cut right behind the shifter. Nothing from that point back. And no hood, so no emblem.

So basically, post below to stake a "claim". I am thinking on a first come first served basis and will watch who posted first. Will update as things go along. Feel free to ask questions about specifics and I will answer them once I actually have the thing and am able to find out.
__________________
2007 GS 450h-Active Stabilizer/Radar cruise
1994 L Blue 3.70 VTD



ASE Master Automobile
ASE Advanced Level Specialist
Toyota Master Diagnostic Technician (former life)
Reply With Quote
  #2  
Old 03-07-2014, 01:20 AM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,421
Re: JDM RHD front clip part out

Am interested in the folding mirror switch & the mating connector (with short length of wire for colour matching) and the bolt that is behind that switch (the bolt holds the under steering wheel knee cover).

Let me know what you think you want for them.

will pay using paypal.

thanks

Steve
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #3  
Old 03-07-2014, 08:26 AM
gwynethh's Avatar
gwynethh gwynethh is offline
Registered User
Subaru Silver Contributor
 
Join Date: Jun 2012
Location: Kittery, ME
Posts: 400
Re: JDM RHD front clip part out

"including JDM climate control panel"
If I can get a good price I would be interested so to do a JDM/USA mod/swap.
Reply With Quote
  #4  
Old 03-07-2014, 02:17 PM
INVADR's Avatar
INVADR INVADR is offline
Pew Pew!
 
Join Date: Mar 2013
Location: Houston
Posts: 42
Re: JDM RHD front clip part out

Dat engine cover doe.

And if you absolutely HATE the JDM wing, I'll get it out of your sight.
__________________
Mark S.
1995 LSi, EPM, #1152, 197k(ish) miles, 5-speed
Reply With Quote
  #5  
Old 03-19-2014, 03:40 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,421
Re: JDM RHD front clip part out

Photos please now that you have it .....
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122