SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
request for a crossmeber 5speed. (WTB)
Hei.
Is the some one here that maybe have a cross member for a 1990 legacy manual tranny. (and the oem cats must fit) I have make one for my car. But the cats will not fit. If some one have a grate deal on one ples let me know. i have a shipping adress in New Jearsy Thanks and best Alexander.
__________________
Alexander (Norway) My subarus: 1992 Svx LSI 5-MT(3.54) 1998 Legacy BG 2.5L GX |
#2
|
||||
|
||||
Re: request for a crossmeber 5speed. (WTB)
Anny one? Its for my svx.
I have used a maualtranny from a 90legacy.
__________________
Alexander (Norway) My subarus: 1992 Svx LSI 5-MT(3.54) 1998 Legacy BG 2.5L GX |
#3
|
|||
|
|||
Re: request for a crossmeber 5speed. (WTB)
Quote:
|
#4
|
||||
|
||||
Re: request for a crossmeber 5speed. (WTB)
I know that. But i have seen some one here that have made a crossmember for the SVX to use. When you are swap over to 5speed. That is what i am looking for. So i can use the stok exhaust systems on my car.
__________________
Alexander (Norway) My subarus: 1992 Svx LSI 5-MT(3.54) 1998 Legacy BG 2.5L GX |
#5
|
||||
|
||||
Re: request for a crossmeber 5speed. (WTB)
Something like this one.
__________________
Alexander (Norway) My subarus: 1992 Svx LSI 5-MT(3.54) 1998 Legacy BG 2.5L GX |
#6
|
||||
|
||||
Re: request for a crossmeber 5speed. (WTB)
I had one made locally from my stock crossmember for around $300. That might be your best bet. Ask around different shops and see if they are willing to do it. Show them that picture and tell them you need something similar. Do you still have the stock crossmember?
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#7
|
||||
|
||||
Re: request for a crossmeber 5speed. (WTB)
Might want to send a PM to Johnnybeas, as last I saw he was making 5mt kits. I got mine (same as above pic) from YT - he might have some left laying around...? if not I'm sure OT could make you one too...
__________________
-Craig 94 LSi 5spd Barcelona Red, 14Xk miles. Full custom exhaust (Stebro cat-back, custom rest of the way forward) 8000K HID kit from Tom (SVXfiles), Energy Suspension front sway bar bushings, Non-Droopy visors, Race Concepts C/D + Dimpled Rotors, Axxis Ultimate pads,SS brake lines, Bontrager Works #009 (or something like that), stripped interior. (up next) Full cage, fuel cell, 327 swap |
#8
|
||||
|
||||
Re: request for a crossmeber 5speed. (WTB)
I used all 3 WRX (2002) transmission crossmembers in my conversion, however, we did have to cut a small piece of the front piece for it to clear the exhaust. I've replaced that part of the exhaust now and there's no clearance issues.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#9
|
||||
|
||||
Re: request for a crossmeber 5speed. (WTB)
I was planning on doing a 5MT swap, but decided not to. I have a cross member - It's a little rusty/could do with a coating of rust converter, but it structurally sound and in decent condition. I bought it off a member here for $300 + shipping. Would sell for $200 + $50 shipping to Jersey. Let me know.
|
|
|