SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Fog light wires?
I have no wire harness diagram, and I am hooking up fog lights on my 92. even though there is a switch on the inside for it, and a fuse, and wires, I have no fog lights for some reason...so I want to hook up what I have, thru the original wiring...is the wire that is clipped to the hood latch, the one that goes to the original fog lights?
|
#2
|
||||
|
||||
Do you mean that your foglights don't work, or that you really have no foglights at all? As far as I know, all SVXs have foglights, they are part of the headlight assembley. They are the two inboard lamps, closest to the grill. Your post just sounds like you think you have no foglights at all.
__________________
-Evil Jeff '03 WRX Wagon, World Rally Blue '94 SVX LSi, Barcelona Red '89 XT6 4WD, Grey & Rust (and legally, an '01 Outback VDC skankmobile) |
#3
|
|||
|
|||
oh okie dokie
maybe the bulbs are burned out then eh? hey, what the hell is with having fog lights up with all the OTHER lights? to me fog lights are like...aux ones down below.....ok, lets say they are there...how would I run the lights I just installed down below(I wanted them anyways) into the fog light circuit thats already there? a wire splice of some kind. I am not mechanicly inept...I just ignorant heh. The lights I have have the ground to frame, and then the positive lead of course, so where would be the best place to hook in this positive? and what would be the best way going about it?
|
|
|