The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > FAQs, How To's, & Vendors > How-To Docs & FAQs > Technical Service Bulletins

 
 
Thread Tools Display Modes
  #1  
Old 04-20-2010, 07:39 PM
How-To Doc How-To Doc is offline
How-To Document Administrator
 
Join Date: Apr 2010
Location: SVXWN Country
Posts: 1
Metal Sealing Rings - Automatic Transmissions

Metal Sealing Rings - Automatic Transmissions

Author: Subaru

TSB 87-48 (Aug)

SUBJECT: Metal sealing rings

Various Units

PROBLEM: Slipping, or sometimes no-shift

POSSIBLE SOLUTION: Sealing rings could be under-size.

1) Always inspect rings as outlined in SIL 84-29
2) Place ring in bore of drum where they will be running. (See Figures 1 & 2)
3) Sealing rings should be snug in bore; rings should fit all around the drum. (drum could be out-of-round)
4) Air check all drums. (Use 30 PSI air pressure only.) If air escapes you have leaks -- better find now, than later. This represents lost clutch pressure, and could result in soft application and burned friction material.
5) Following these steps will help you save money, plus help you build better units.


.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122