The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > MOD Mania > Engine Management

Reply
 
Thread Tools Display Modes
  #1  
Old 07-09-2009, 12:28 PM
poweredx2 poweredx2 is offline
Registered User
 
Join Date: Nov 2003
Location: greenville,nc
Posts: 656
Airflow meter mod

I've noticed my svx has been running rough.My wires at the connector at the afm are breaking from age,heat,engineflex etc.I have a few old nissan meters here with connectors but they are different so we think.If you remove the base connector from the afm,yes the one with 4 small screws,you can wiggle it out and replace the svx base connector with the one from a z32 nissan.After that just splice the nissan connector onto the svx harness and you are back action.A bit of caution I took was to remove the top from the svx afm to visually see that the nissan prongs were aligned with the prongs inside of the svx meter board.My cars drive great.One other thing if you have a damage airflow meter housing don't trash the entire meter just swap the meter board to a svx or nissan unit or vice versa,the meterboard is secured by4screws.I trashed 6 z32 meters because of minor damages
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122