Alternator pulley mod.

[Dutchflat6]

For some of us to use the awsome eg33 engine in another car or plane,
I use the engine in an other location Don't use PWR or AC, just the alternator.
I modified the pulley and the original mount a bit so i could use the other belt drive on the crank pulley closer to the engine.
I have ground and filed of some material on the upper mount with the long bolt, approx. 4mm.

The alternator pulley with other offset from: Mitsubishi AP 5002 ( from alternator, starters and parts ).
The belt is a: 4pk 648 Conitech
The tensioner is from VW, part no: 068 903 251F.

The new position is now lined up perfect! and does not interfere with intake or the crank sensor below. It is not expensive.







.

[Blacky]

Nice setup. What are you using the engine for?