SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
I know I should be able to do this myself
Can anyone please give me the part number for the back gearbox mtg rubber on a JDM 1993 CXW car? The easily accessible parts lists seem to be for US models, which may be different. They refer to 41022-PA-081. My Subaru dealer tells me that part is described as non UK, fair enough, but also as 'right hand'. The diagram I used from a US supplier showed the mtg as one unit. Much appreciated if anyone can advise.
|
#2
|
||||
|
||||
Re: I know I should be able to do this myself
The USDM and JDM/UK transmission mounts are different. The trans mount varies based on the type of AWD of the trans. The JDM/UK have the VTD type and the USDM has the transfer clutch type. So a USDM one won't work.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
|
|