SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Rear diff bushings torn what to replace with?
This past week when i replaced my 5spd with another one about a week ago (destroyed the original) and I noticed, while jacking up the car that the rear diff bushings that the studs go into to from the rear diff were both completely torn. I was wondering if its possible to replace them with some stiffer stronger ones that wont rip from some abuse, how hard it would be to change, if any one else has had this problem, and could the ripped bushings cause a slight vibration under heavy load from the drive shaft area because of more deflection from the broken bushings? Thanks
__________________
92 Honda CBR 600 95 Miata |
#2
|
||||
|
||||
Yes, you can replace them with stiffer aftermarket bushings. There was a group buy on them run by Earthworm. His still have some sets to sell to I think.
http://www.subaru-svx.net/forum/showthread.php?t=29540 I got a set but I have not installed them.
__________________
2005 Legacy GT 2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles My WRX's Cardomain Page |
#3
|
||||
|
||||
I still have a few sets remaining.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#4
|
|||
|
|||
Hey, I was curious how much for a set?
|
#5
|
||||
|
||||
or you can make ur own... Its not hard
Tom |
#6
|
||||
|
||||
Quote:
http://www.subaru-svx.net/forum/showthread.php?t=29540 (also linked my my siggy)
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
Thread Tools | |
Display Modes | |
|
|