SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
4eat wont go into reverese?
I have a friend with a 91 legacy awd 4eat and it wont ingage in reveres, you can feel the car tring to go reveres, but the trannie just slips in the rest of the gears. Is there any adjustment or any thing else that would cause this. I know the SVX croud has the most experiance with the 4eat so thats why i posted it here.
__________________
92 Honda CBR 600 95 Miata |
#2
|
||||
|
||||
I'm guessing this is a problem with the low/reverse clutch.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#3
|
||||
|
||||
Sorry about the bad grammer, i was pretty tired. The car only slips in reverse, the rest of the gears work fine.
Do you have any idea on how hard or costly it would be to fix the problem if it was inded what you think? Thanks
__________________
92 Honda CBR 600 95 Miata |
#4
|
||||
|
||||
I had the same problem, had it towed to a trans shop. The trans was shot and needed a rebuilt. Check out the attachment.
|
|
|