SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Air conditioning direction of flow question
Putting back together my daughters 92 ac system, I installed a new aftermarket receiver dryer from Advance auto. The in and out are marked. The unit can only install one way...the in and out look reversed to the way I expected the refrigerant direction to flow. I looked through the factory ac section of the service manual, but didn't find the answer...I thought it flowed in the direction from the compressor thorough the condensor to the drier to the evaporator...
Should the drier "out" be the connection from the condenser?
__________________
Cheers! Gordon 1997 Ebony #308 113k "The Black Diva"SOLD 1992 Black over Liquid Silver 152k SOLD 1992 Ebony 251k 444 SOLD 1999 Silver SLK230 134k SOLD 1997 Green Outback 137k SOLD 2013 Honda Accord I4 SOLD 2015 Subaru Crosstrek 30k 2018 Tesla M3 30k |
#2
|
|||
|
|||
Re: Air conditioning direction of flow question
if i get what you are saying right then you are correct. the discharge (high side) line from the compressor goes to the condensor, then to the drier. the drier outlet should be going towards the evaporator. if that is not the way it installs then they may have sold you an accumulator or generic part.
|
|
|