The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2006, 10:16 AM
SVX10's Avatar
SVX10 SVX10 is offline
Fighting with electricity
 
Join Date: Mar 2001
Location: Tempe, AZ
Posts: 1,204
Send a message via AIM to SVX10 Send a message via Yahoo to SVX10
Trans & bearing tool

Hey guys. I'm thinking about buying a shop press to assist me with a 5MT rebuild. Would this also be useful for bearings? Could I take out my rear hub assembly and use this press to extract the bearing from the hub? It would be cheaper to buy the press and some adapter plates specific to the SVX bearing than it would be to buy the hub tamer.

Thanks in advance.

Mat
__________________
Time for my very own long list of mods:
92 SVX LS-L - Ebony Pearl - 2002 WRX 5MT trans w/STi gearset (rebuilt & installed myself ) - BMW E46 HID retrofit - Kenwood Headunit - Phoenix Gold 75x4 RMS amp - Alpine Type R 6.5" front components - Alpine Type R 6x9 3way rear speakers - 18"x9" Rota G-Force wheels w/225/40ZR18 Toyo T1R's - Mychailo's custom springs - Urethane front & rear sway bar bushings - KC exhaust (2.5" dual magnaflow) - Escaine seat swap - Removed Spoiler

I don't care if Subaru says it's STI...it will always be STi to me
Reply With Quote
  #2  
Old 03-13-2006, 10:25 AM
Speedklix's Avatar
Speedklix Speedklix is offline
Locker Link Solution
 
Join Date: Aug 2002
Location: North Shore, MA
Posts: 1,902
I thought about that once, never tried it though.
What role will the press play in the 5mt?
__________________
-Mike
ECUTune2v7 - 4.11 5 Speed - Sprung 6 Puck Clutch - D&S Rotors - SS Brake & Clutch Lines - HKS Panel Filter - HeaderBack Exhaust -80GB Hard Drive - GroupN Engine Mounts - - some other "tricks"
[SIGPIC][/SIGPIC]
In progess: track down mystery noise <-identified, paint the new dash, get better pic
Spring plans: Replace Trans - Integrate ECU with the carputer - Suspension - Go back to STI Filter - Paint? Maybe not - Next Oil change: Purolator L30165

Member #995 | My Locker | My New Locker

Catch you next at: ? Auto-X ?
Reply With Quote
  #3  
Old 03-13-2006, 10:38 AM
AvPPoW AvPPoW is offline
Registered User
 
Join Date: Sep 2004
Location: Harrisburg
Posts: 487
Yes, this is how I did the bearing on Mike621's car
Reply With Quote
  #4  
Old 03-13-2006, 05:00 PM
SVX10's Avatar
SVX10 SVX10 is offline
Fighting with electricity
 
Join Date: Mar 2001
Location: Tempe, AZ
Posts: 1,204
Send a message via AIM to SVX10 Send a message via Yahoo to SVX10
for the 5mt the press will serve as an installation tool for a strengthened gearset. I guess for 100 bux I could find plenty of uses for it. If all else fails, it'll be the coolest can crusher ever!
__________________
Time for my very own long list of mods:
92 SVX LS-L - Ebony Pearl - 2002 WRX 5MT trans w/STi gearset (rebuilt & installed myself ) - BMW E46 HID retrofit - Kenwood Headunit - Phoenix Gold 75x4 RMS amp - Alpine Type R 6.5" front components - Alpine Type R 6x9 3way rear speakers - 18"x9" Rota G-Force wheels w/225/40ZR18 Toyo T1R's - Mychailo's custom springs - Urethane front & rear sway bar bushings - KC exhaust (2.5" dual magnaflow) - Escaine seat swap - Removed Spoiler

I don't care if Subaru says it's STI...it will always be STi to me
Reply With Quote
  #5  
Old 03-13-2006, 05:01 PM
SVX10's Avatar
SVX10 SVX10 is offline
Fighting with electricity
 
Join Date: Mar 2001
Location: Tempe, AZ
Posts: 1,204
Send a message via AIM to SVX10 Send a message via Yahoo to SVX10
Quote:
Originally Posted by AvPPoW
Yes, this is how I did the bearing on Mike621's car
Did you get plates made to press out the bearing, or were you able to do it without any special tools?
__________________
Time for my very own long list of mods:
92 SVX LS-L - Ebony Pearl - 2002 WRX 5MT trans w/STi gearset (rebuilt & installed myself ) - BMW E46 HID retrofit - Kenwood Headunit - Phoenix Gold 75x4 RMS amp - Alpine Type R 6.5" front components - Alpine Type R 6x9 3way rear speakers - 18"x9" Rota G-Force wheels w/225/40ZR18 Toyo T1R's - Mychailo's custom springs - Urethane front & rear sway bar bushings - KC exhaust (2.5" dual magnaflow) - Escaine seat swap - Removed Spoiler

I don't care if Subaru says it's STI...it will always be STi to me
Reply With Quote
  #6  
Old 03-13-2006, 05:11 PM
Speedklix's Avatar
Speedklix Speedklix is offline
Locker Link Solution
 
Join Date: Aug 2002
Location: North Shore, MA
Posts: 1,902
Quote:
Originally Posted by SVX10
for the 5mt the press will serve as an installation tool for a strengthened gearset
Ahh, got it.
Quote:
Originally Posted by SVX10
it'll be the coolest can crusher ever!
__________________
-Mike
ECUTune2v7 - 4.11 5 Speed - Sprung 6 Puck Clutch - D&S Rotors - SS Brake & Clutch Lines - HKS Panel Filter - HeaderBack Exhaust -80GB Hard Drive - GroupN Engine Mounts - - some other "tricks"
[SIGPIC][/SIGPIC]
In progess: track down mystery noise <-identified, paint the new dash, get better pic
Spring plans: Replace Trans - Integrate ECU with the carputer - Suspension - Go back to STI Filter - Paint? Maybe not - Next Oil change: Purolator L30165

Member #995 | My Locker | My New Locker

Catch you next at: ? Auto-X ?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122