The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Not Exactly SVX

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 01-16-2007, 10:37 AM
mikecg's Avatar
mikecg mikecg is offline
Registered User
 
Join Date: Jul 2003
Location: Esconidido, CA
Posts: 2,422
Send a message via AIM to mikecg Send a message via Yahoo to mikecg
Garage knowledge

There is some quick things to know when working in a garage. Most of this came out of an article in a magazine I read.

Things for the Shop

1. Finger Nail Polish remover makes an excellent bug and tar remover for chrome. (Just don’t use it on the painted areas)
2. Can’t read the size on old sockets; wipe some colored paint across the size stamping. The pain will fill in the stamp and make it readable.
3. A drill clamped in a vise can be used as a make shift wire wheel or grinder.
4. A dab of grease on a screwdriver tip will hold a nut onto it to get into tight places.
5. Use a piece of garden hose as a stethoscope to pinpoint that ticking noise.
6. Think you have a dead cylinder? Spray your headers with water from a spray bottle. The one that stays wet is the one not firing.
7. When tapping holes, turn the tap a 1\2 turn forward and a ¼ turn backwards, then repeat until complete. This will prevent the tap from breaking off, as the ¼ turn back clears the debris.
8. Cover your arms and hands with baby powder before working with fiberglass.
9. Need to get a metric bolt or nut off and only have standard wrenches? A penny or dime can be used to take up the slack between the head and the wrench.
10. Can’t find an oil filter tool? An old V-belt and channel locks or pliers can be used like a strap wrench.
11. Tired of dropping those wrenches in tight spots. Tie a piece of string from it to your wrist.
12. Next time you change your oil, skip the $0.99 conventional oil and grab the full synthetic. The initial cost may sting, but you’ll be reward with a much better lubricated engine, which adds horse power and gas mileage. Do the same for the differentials also.
13. Polishing your expensive billet or chrome wheels takes a soft touch. Fleece material is perfect, but T-shirts, cloth diapers, or terry cloth can actually scratch more.
14. Trying to mount a transmission by yourself? Insert threaded rod of the appropriate size into the engine blocks mounting surface. Then you can simply jack it up and slide it onto the treaded rod.
15. A digital camera can be a valuable tool for reassembling things later, so take lots of pictures when you take it apart.
16. Listerine works better then soap for getting the smell of gas and other petroleum products off your hands.
17. Brake cleaner and nail polish remover are great degreasers for small parts.
18. For longest tire life check alignment and rotate every 6000-8000 miles.
19. Tire size decoding: 275/30R24 – 275 is the width of the tire in Millimeters, 30 is the sidewall aspect ration percentage (30 percent of 275), 24 is the wheel diameter.
20. If you have custom wheels on your car with special lugs, but still use the stock spare, wire tie factory lugs to the spare rim.
21. If you sock rusty parts in straight vinegar, you’ll find that after a few days the rust can be easily removed. Parts will also be clean and paint free.
22. For a quick and easy drip pan, use a cookie sheet with cardboard or kitty litter on it.
23. Vaseline on your battery posts will keep them from corroding and provide perfect contact.
24. If your contacts are corroded already use baking soda and water.
25. Latex Gloves are porous and can allow bad stuff to pass through to your skin. Put disposable nylon gloves under the latex when working with chemicals that can be hazardous to your skin.
26. Rubbing a non-magnetized screwdriver against a magnet will magnetize it.
27. Got chrome with a small amount of surface rust on it? Wadding up some aluminum foil and rubbing it over the rust will make short work of the problem.
28. Mixing tire tread designs and compounds can lead to poor handling and braking. Always use the same type of tires all the way around your car.
29. A spark plug not properly torqued will not seat all the way, preventing the plug from dissipating heat correctly. This can elevate combustion chamber temperatures, which can cause detonation.
30. Got a Holley Carburetor with a bowl screw leak? The rubber gasket on a common roofing nail is the correct size for the application.
31. Common chalkboard chalk or kid’s sidewalk chalk can be used on files to prevent them from getting clogged with filings.
32. After breaking in your new engine for 20-minutes change the oil and oil filter. Break-in lubricants will have worn off and worked there way into the system and can clog the oil filter.
33. Rain-X works wonders on the glass, inside and out. Use it to also preserve the rubber glass seals and to prevent the windows that move from sticking to the seals and tearing them.
34. Use copper or multilayer steel gaskets on headers. They cost more, but I’ll last much longer then paper.
35. Find a screw in your tire? Deflate the tire prior to removing it to prevent it from shooting across the room.
Reply With Quote
  #2  
Old 01-16-2007, 10:53 AM
Landshark's Avatar
Landshark Landshark is offline
Hater
 
Join Date: Mar 2002
Location: The Burgh
Posts: 10,807
36. keep your cell phone handy to call the wife if you're under the car working and run out of beer.
__________________
Alan

1987 928 S4 (Black) SOLD!
1997 SVX LSi (Ebony) SOLD!
2005 Legacy GT (Silver) [Cobb Stg 2+] SOLD!
1987 928 S4 (Black) SOLD!
2005 Forester XT Premium (Crystal Gray Metallic) SOLD!
2008 Lancer Evolution X MR (Apex Silver) [Cobb Stg 1+]
2015 Outlander Sport 2.4GT AWD (Mercury Gray)
2013 G37xS (Obsidian Black)
Reply With Quote
  #3  
Old 01-16-2007, 11:51 AM
svxistentialist's Avatar
svxistentialist svxistentialist is offline
Jersey Girl
Alcyone Gold Contributor
 
Join Date: Mar 2001
Location: Ireland
Posts: 8,270
Send a message via Skype™ to svxistentialist
Registered SVX
Quote:
Originally Posted by mikecg
There is some quick things to know when working in a garage. Most of this came out of an article in a magazine I read.

Things for the Shop

1. Finger Nail Polish remover makes an excellent bug and tar remover for chrome. (Just don’t use it on the painted areas)
2. Can’t read the size on old sockets; wipe some colored paint across the size stamping. The pain will fill in the stamp and make it readable.
3. A drill clamped in a vise can be used as a make shift wire wheel or grinder.
4. A dab of grease on a screwdriver tip will hold a nut onto it to get into tight places.
5. Use a piece of garden hose as a stethoscope to pinpoint that ticking noise.
6. Think you have a dead cylinder? Spray your headers with water from a spray bottle. The one that stays wet is the one not firing.
7. When tapping holes, turn the tap a 1\2 turn forward and a ¼ turn backwards, then repeat until complete. This will prevent the tap from breaking off, as the ¼ turn back clears the debris.
8. Cover your arms and hands with baby powder before working with fiberglass.
9. Need to get a metric bolt or nut off and only have standard wrenches? A penny or dime can be used to take up the slack between the head and the wrench.
10. Can’t find an oil filter tool? An old V-belt and channel locks or pliers can be used like a strap wrench.
11. Tired of dropping those wrenches in tight spots. Tie a piece of string from it to your wrist.
12. Next time you change your oil, skip the $0.99 conventional oil and grab the full synthetic. The initial cost may sting, but you’ll be reward with a much better lubricated engine, which adds horse power and gas mileage. Do the same for the differentials also.
13. Polishing your expensive billet or chrome wheels takes a soft touch. Fleece material is perfect, but T-shirts, cloth diapers, or terry cloth can actually scratch more.
14. Trying to mount a transmission by yourself? Insert threaded rod of the appropriate size into the engine blocks mounting surface. Then you can simply jack it up and slide it onto the treaded rod.
15. A digital camera can be a valuable tool for reassembling things later, so take lots of pictures when you take it apart.
16. Listerine works better then soap for getting the smell of gas and other petroleum products off your hands.
17. Brake cleaner and nail polish remover are great degreasers for small parts.
18. For longest tire life check alignment and rotate every 6000-8000 miles.
19. Tire size decoding: 275/30R24 – 275 is the width of the tire in Millimeters, 30 is the sidewall aspect ration percentage (30 percent of 275), 24 is the wheel diameter.
20. If you have custom wheels on your car with special lugs, but still use the stock spare, wire tie factory lugs to the spare rim.
21. If you sock rusty parts in straight vinegar, you’ll find that after a few days the rust can be easily removed. Parts will also be clean and paint free.
22. For a quick and easy drip pan, use a cookie sheet with cardboard or kitty litter on it.
23. Vaseline on your battery posts will keep them from corroding and provide perfect contact.
24. If your contacts are corroded already use baking soda and water.
25. Latex Gloves are porous and can allow bad stuff to pass through to your skin. Put disposable nylon gloves under the latex when working with chemicals that can be hazardous to your skin.
26. Rubbing a non-magnetized screwdriver against a magnet will magnetize it.
27. Got chrome with a small amount of surface rust on it? Wadding up some aluminum foil and rubbing it over the rust will make short work of the problem.
28. Mixing tire tread designs and compounds can lead to poor handling and braking. Always use the same type of tires all the way around your car.
29. A spark plug not properly torqued will not seat all the way, preventing the plug from dissipating heat correctly. This can elevate combustion chamber temperatures, which can cause detonation.
30. Got a Holley Carburetor with a bowl screw leak? The rubber gasket on a common roofing nail is the correct size for the application.
31. Common chalkboard chalk or kid’s sidewalk chalk can be used on files to prevent them from getting clogged with filings.
32. After breaking in your new engine for 20-minutes change the oil and oil filter. Break-in lubricants will have worn off and worked there way into the system and can clog the oil filter.
33. Rain-X works wonders on the glass, inside and out. Use it to also preserve the rubber glass seals and to prevent the windows that move from sticking to the seals and tearing them.
34. Use copper or multilayer steel gaskets on headers. They cost more, but I’ll last much longer then paper.
35. Find a screw in your tire? Deflate the tire prior to removing it to prevent it from shooting across the room.
Mike, this is pretty good.

There is so much common sense in here, it ought to be posted up in the How-To section as General Tips.

Joe
__________________
Black Betty [Bam a Lam!] '93 UK spec, still languishing Betty
Jersey Girl Silver '92 UK [Channel Isles] 40K Jersey Girl @ Mersea
Candy Purple Honda Blackbird Plum Dangerous
White X2 RVR Mitsubishi 1800GDI. Vantastic

40,000 miles Jersey Girl
Reply With Quote
  #4  
Old 01-16-2007, 12:04 PM
ensteele's Avatar
ensteele ensteele is offline
Betcha can't buy just one!
Alcyone Gold Contributor
 
Join Date: Jan 2002
Location: Burlington, WA
Posts: 19,552
Send a message via ICQ to ensteele Send a message via Yahoo to ensteele Send a message via Skype™ to ensteele
Registered SVX Classic SVX
I will put it there and if there is more to be added, I can do that too. Thanks for posting that. Very good information. Now just to remember all of it as I go through life.
__________________
.
Earl .... ... .... ><SVX(*>

Subaru Ambassador

[COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430
1992 Dark Teal LS-L ~184K (05/91) #0739
1992 Claret LS-L ~196K (05/91) #0831
1992 Pearl LS-L ~103K (06/91) #1680
1992 Pearl LS-L ~151K (06/91) #2229
1992 Dark Teal LS ~150K (07/91) #3098 (parts car)
1992 White LS-L ~139K (08/92) #6913
1993 25th AE ~98K (02/93) #164
1993 25th AE ~58K (02/93) #176
1993 25th AE ~107K (02/93) #215
1993 25th AE ~162K (02/93) #223
1994 Laguna Blue Pearl LSi ~124K (1/94) #2408
1994 Laguna Blue Pearl LSi ~144K (10/93) #1484
1994 Laguna Blue Pearl LSi ~68K (10/93) #1525
1994 Barcelona Red LSi ~46K (02/94) #2624
1994 Pearl LSi ~41K (12/93) #1961
1995 Bordeaux Pearl LSi ~70K (02/95) #855
1996 Polo Green LSi ~95K (03/96) #872
1997 Bordeaux Pearl LSi ~55K (08/96) #097
2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951
1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420

My Email | Old Locker | New Locker | Picture of 15 of the 19
Reply With Quote
  #5  
Old 01-16-2007, 01:10 PM
ensteele's Avatar
ensteele ensteele is offline
Betcha can't buy just one!
Alcyone Gold Contributor
 
Join Date: Jan 2002
Location: Burlington, WA
Posts: 19,552
Send a message via ICQ to ensteele Send a message via Yahoo to ensteele Send a message via Skype™ to ensteele
Registered SVX Classic SVX
It is done and you can go here in the How-To Locker. It is in the SVX Information folder.
__________________
.
Earl .... ... .... ><SVX(*>

Subaru Ambassador

[COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430
1992 Dark Teal LS-L ~184K (05/91) #0739
1992 Claret LS-L ~196K (05/91) #0831
1992 Pearl LS-L ~103K (06/91) #1680
1992 Pearl LS-L ~151K (06/91) #2229
1992 Dark Teal LS ~150K (07/91) #3098 (parts car)
1992 White LS-L ~139K (08/92) #6913
1993 25th AE ~98K (02/93) #164
1993 25th AE ~58K (02/93) #176
1993 25th AE ~107K (02/93) #215
1993 25th AE ~162K (02/93) #223
1994 Laguna Blue Pearl LSi ~124K (1/94) #2408
1994 Laguna Blue Pearl LSi ~144K (10/93) #1484
1994 Laguna Blue Pearl LSi ~68K (10/93) #1525
1994 Barcelona Red LSi ~46K (02/94) #2624
1994 Pearl LSi ~41K (12/93) #1961
1995 Bordeaux Pearl LSi ~70K (02/95) #855
1996 Polo Green LSi ~95K (03/96) #872
1997 Bordeaux Pearl LSi ~55K (08/96) #097
2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951
1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420

My Email | Old Locker | New Locker | Picture of 15 of the 19
Reply With Quote
  #6  
Old 01-17-2007, 05:16 AM
mikecg's Avatar
mikecg mikecg is offline
Registered User
 
Join Date: Jul 2003
Location: Esconidido, CA
Posts: 2,422
Send a message via AIM to mikecg Send a message via Yahoo to mikecg
Yaaaa, my first addition to the How-To folder. I'm so proud.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122