CAI Feeler

[Johnybeas]

UPDATE 12/28/12

I would like to thank everyone for their patience in this project and would like to release a few details as this project is finally coming to a close. I would like to thank the following members for their contribution to the project. These will be the first customers to receive the new TruSpeed Performance Cold Air Intake for the Subaru SVX
Stage II Intake
1.Soobcrazy
2.Nikfu (powdercoat- black)
3.larryhopper1967
4.Thickasxtheives
Stage III
1.Johnybeas (powdercoat- black)

Prices have been updated to their current cost and should not change. Dyno results, product pictures, etc. will be coming.

PRODUCT DESCRIPTION

Optional add ons,

• Powdercoating most colors $65 (special colors available)
• Z32 MAF Upgrade $50
• Red or Blue Couplers

TruSpeed Stage I SVX Intake (short ram):
$333.60
Dyno Graph(link to results will be placed here)
Product Images (link to images will be placed here)
Pipe Size: Dual 2.5in(63.5mm)-Single 3 in (76 mm)
Material: Mandrel Bent 6061 T6 Aluminum TIG Welded
Location: From dual throttle bodys to MAF Sensor
Replacement Filter: AEM DryFlow Air Filter 21-203DOSK

• Base Outside Diameter: 5.5 in (140 mm)
• Flange Inside Diameter: 3 in (76 mm)
• Flange Length: 0.938 in (24 mm)
• Flange Offset: 0.438 in (11 mm)
• Flange Type: Offset
• Height: 5 in (127 mm)
• Inner Structural Support: Yes
• Top Outside Diameter: 4.75 in (121 mm)
• Top Style: Rubber
• Top Material/Finish: None
• Filter Material: Non-woven Synthetic

Package Includes:

• One cone style Dryflow® synthetic air filter (rechargable)
• intake piping w/ cnc'ed vacuum fittings
• two 2.5" straight silicone couplers,
• one 3" straight silicone coupler
• 7 clamps
• one MAF Adapter plate
• four bolts for MAF adapter
• MAF gasket

TruSpeed Stage II SVX Intake (Cold Air w/ MAF)
$390.00
Dyno Graph(link to results will be placed here)
Product Images (link to images will be placed here)
Pipe Size: Dual 2.5in(63.5mm)-Single 3 in (76 mm)
Material: Mandrel Bent 6061 T6 Aluminum TIG Welded
Location: Full piping from throttle bodies to wheel well with separation for the MAF sensor
Replacement Filter: AEM DryFlow Air Filter 21-2038BF

• Base Outside Diameter: 6 in (152 mm)
• Flange Inside Diameter: 3 in (76 mm)
• Flange Length: 1.5 in (38 mm)
• Flange Type: Centered
• Height: 8.125 in (206 mm)
• Inner Structural Support: Yes
• Top Outside Diameter: 5.125 in (130 mm)
• Top Style: Rubber
• Top Material/Finish: None
• Filter Material: Non-woven Synthetic

Package Includes:

• One cone style Dryflow® synthetic air filter (rechargable)
• intake piping w/ vacuum fittings
• two 2.5" straight silicone couplers
• two 3" straight silicone coupler
• 9 clamps
• one MAF Adapter plate
• four bolts for MAF adapter
• MAF gasket

TruSpeed Stage III SVX Intake (Cold Air w/ Air bypass) (*requires MAP Sensor*)
$419.99
Dyno Graph(link to results will be placed here)
Product Images (link to images will be placed here)
Pipe Size: Dual 2.5in(63.5mm)-Single 3 in (76 mm)
Material: Mandrel Bent 6061 T6 Aluminum TIG Welded
Location: Full piping from throttle bodies to wheel well with AEM Air Bypass Valve in stock MAF location.
Replacement Filter: AEM DryFlow Air Filter 21-2039BF

• Base Outside Diameter: 6 in (152 mm)
• Flange Inside Diameter: 3 in (76 mm)
• Flange Length: 1.5 in (38 mm)
• Flange Type: Centered
• Height: 9.25 in (235 mm)
• Inner Structural Support: Yes
• Top Outside Diameter: 5.125 in (130 mm)
• Top Material/Finish: None
• Filter Material: Non-woven Synthetic

Package Includes:

• One cone style Dryflow® synthetic air filter (rechargable)
• intake piping w/ vacuum fittings
• two 2.5" straight silicone couplers
• two 3" straight silicone coupler
• 9 clamps
• one 3" Universal Cold Air Intake Bypass Valve

Here is a picture of the final prototype of the stage III