SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
ABC Pillar cover removal - install???
Before I dive in and break something. Can anyone tell me what needs to be done before I swap interior pillar covers? They are auto seatbelts btw. Does anything need to come out first before yanking the old ones out? Any screws I should know about? I'm hoping it's just a matter of pulling the old ones out and popping the new ones in
__________________
"The things you own end up owning you. It's only after you lose everything that you're free to do anything." 92 Pearl White Ls-l (138k) Euro Headlights & Blinkers, 97 Grill, Euro Tail Lights, SS Brake Lines, Stebro Exhaust, Slotted Rotors, Classic Registration 96 Legacy Outback (206k) 5-speed 2.2 Lightweight Crank Pulley, Group N Trans & Motor Mounts SOLD Wanted: Steering Wheel |
#2
|
||||
|
||||
Re: ABC Pillar cover removal - install???
Michael,
You will need to remove the philips head screws both on the grab handle and each one located inside of the two coat hooks on the c pillar. The A-B Trim needs to come off prior to removing the C trim. Grasp the pillar trim firmly and pull straight towards the inside of the car and slightly down. Voila.
__________________
1991 SVX L JDM |
#3
|
||||
|
||||
Re: ABC Pillar cover removal - install???
Thanks Mike, that's what I was hoping for. The tint shop put some small cuts in the B pillar 10 years ago. Now they have grown into large cuts so they have to go.
__________________
"The things you own end up owning you. It's only after you lose everything that you're free to do anything." 92 Pearl White Ls-l (138k) Euro Headlights & Blinkers, 97 Grill, Euro Tail Lights, SS Brake Lines, Stebro Exhaust, Slotted Rotors, Classic Registration 96 Legacy Outback (206k) 5-speed 2.2 Lightweight Crank Pulley, Group N Trans & Motor Mounts SOLD Wanted: Steering Wheel |
|
|