SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
rear heater bars?
are the rear heater bars on the svx glued onto the glass or cast
inside the glass? i need to know this for stripping tint from the glass, if it is on it, i will lose the heater bars. cheers all |
#2
|
||||
|
||||
Re: rear heater bars?
They are glued or printed on, not cast inside. Is it not that easy to remove the tint without also removing those?
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#3
|
|||
|
|||
Re: rear heater bars?
Yer they are just glued on.
You can remove the tint without the heater/demister bars coming off tho. Pro tinters use a steam machine to melt the glue and the tint just peels away, you cant just use a razor blade to remove any remaining glue like you to on the side windows. Can buy a heavy duty window cleaner, funily enough called tint glue remover made for cleaning any remaining glue without using a razor blade and leaving the demister strips intact. May be able to use prepsol or metho ect for the same effect. cheers Nick |
Thread Tools | |
Display Modes | |
|
|