The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 09-13-2010, 01:32 PM
SVXgarcia SVXgarcia is offline
Registered User
 
Join Date: Oct 2001
Location: Norwalk,CT
Posts: 234
Send a message via AIM to SVXgarcia
Crank Angle Sensor 2 location pleaase?

I have the following codes:
code 22 (knock sensor or circuit right side )
code 29 (Crank Angle Sensor 2)
code 37 (oxygen sensor No.2)

I need location and part number if any one has them?
on the knock sensor what does the circuit part mean?
Also, can one of these sensors trigger the others? Should I replace them in a particular order and check to see if other codes go away or are they not related at all?

Thank you
Reply With Quote
  #2  
Old 09-13-2010, 02:10 PM
SVXgarcia SVXgarcia is offline
Registered User
 
Join Date: Oct 2001
Location: Norwalk,CT
Posts: 234
Send a message via AIM to SVXgarcia
Re: Crank Angle Sensor 2 location pleaase?

Actually I only need location and how to replace for the Crank Angle sensor 2.
Reply With Quote
  #3  
Old 09-13-2010, 04:51 PM
TomsSVX's Avatar
TomsSVX TomsSVX is offline
Maniac modifier
 
Join Date: Dec 2003
Location: Branchburg, New Jersey
Posts: 15,489
Registered SVX Classic SVX
Re: Crank Angle Sensor 2 location pleaase?

See, they phrased the sensors funny when they did the descriptions... Right not I want to say Crank angle sensor 2 is secondary sensor on the oil pump... But I also have a feeling it is what they refer to as the cam angle sensor as well... Either way it is the same part # for the sensor.

Tom
Reply With Quote
  #4  
Old 09-13-2010, 05:29 PM
SoCal LS-L's Avatar
SoCal LS-L SoCal LS-L is offline
Avalanche Alcyoneer
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Reno, NV
Posts: 2,130
Registered SVX
Re: Crank Angle Sensor 2 location pleaase?

Quote:
Originally Posted by SVXgarcia View Post
Actually I only need location and how to replace for the Crank Angle sensor 2.
According to the service manual, its the one under the alternator, right hand side when looking from the front of the car. Remove the alternator, unplug crank sensor harness, and remove 10mm bolt that holds it down. Inspect for lots of crap on the tip..... clean and replace if needed.
__________________
Chris

"A person convinced against their will, is of the same opinion still"

New?? Find the downloadable SVX Online Service Manual Here
RECOMMENDED READING for newer SVX owners Here some cool info if not fully accurate.
Reply With Quote
  #5  
Old 09-15-2010, 07:50 AM
SVXgarcia SVXgarcia is offline
Registered User
 
Join Date: Oct 2001
Location: Norwalk,CT
Posts: 234
Send a message via AIM to SVXgarcia
Re: Crank Angle Sensor 2 location pleaase?

thank you for the response. Where can I find a part number?
Reply With Quote
  #6  
Old 09-15-2010, 07:56 AM
SVXgarcia SVXgarcia is offline
Registered User
 
Join Date: Oct 2001
Location: Norwalk,CT
Posts: 234
Send a message via AIM to SVXgarcia
Re: Crank Angle Sensor 2, price?

anyone have any idea how much I should expect to pay for crank angle sensor #2?
Reply With Quote
  #7  
Old 09-15-2010, 08:05 AM
SVXgarcia SVXgarcia is offline
Registered User
 
Join Date: Oct 2001
Location: Norwalk,CT
Posts: 234
Send a message via AIM to SVXgarcia
Crank Angle Sensor = Crankshaft position sensor???

Is the Crankshaft Position Sensor(shown in diagram) the same as the crank angle sensor#2

Reply With Quote
  #8  
Old 09-15-2010, 09:05 AM
Cam Cam is offline
Registered User
 
Join Date: Aug 2009
Location: Lynnwood, WA
Posts: 1,029
Registered SVX
Re: Crank Angle Sensor 2 location pleaase?

It should be. The location is correct but the sensor looks slightly different. Where is that diagram from? I have never seen it.
__________________
Cam

'92 Ls-L Dark Teal
11:1 CR ECUTUNE pistons
ECUTUNE .256 duration intake/exhaust cams
ECUTUNE STAGE 2AV1 ECU
Z32 MAF/SR20DET injectors
Balanced & Blueprinted
Reply With Quote
  #9  
Old 09-15-2010, 09:34 AM
Manarius's Avatar
Manarius Manarius is offline
1995 Subaru SVX LSi Polo Green
 
Join Date: Jul 2005
Location: Grantham, PA (Near Harrisburg)
Posts: 2,119
Send a message via ICQ to Manarius Send a message via AIM to Manarius Send a message via MSN to Manarius Send a message via Yahoo to Manarius Send a message via Skype™ to Manarius
Registered SVX
Re: Crank Angle Sensor = Crankshaft position sensor???

Quote:
Originally Posted by SVXgarcia View Post
Is the Crankshaft Position Sensor(shown in diagram) the same as the crank angle sensor#2

I have to say, I really like this picture.

[/offtopic]
__________________
-Jason
(8/23/07-Present) 1995 Subaru SVX LSi (197k) Polo Green (#1102) 03/95
Mods: DDM Tuning 4500k 35w Low Beam HID, 100w H3 Bulbs, Extra Ground Cables, 15 minute $12.96 mod,
svxfiles designed transmission mount (), sporting a "new" tail light bar,
silver BBS rims, custom power steering cooler (one that doesn't dump ATF constantly), new negative lead cable, no more third or fourth gear
(1977-Present) 1977 Chevrolet Corvette (81k) Silver
(12/01/2011-Present) 2005 Subaru Outback 2.5i Limited 5MT (97k)
I have a bad feeling about this.
-Obi Wan Kenobi
Reply With Quote
  #10  
Old 09-15-2010, 01:38 PM
Cam Cam is offline
Registered User
 
Join Date: Aug 2009
Location: Lynnwood, WA
Posts: 1,029
Registered SVX
Re: Crank Angle Sensor 2 location pleaase?

i forgot to mention, there is a crank sensor missing in this picture. The oil pump houses two sensors. I can post pictures later if you would like. Right now mine are very visible and may help you locate them.
__________________
Cam

'92 Ls-L Dark Teal
11:1 CR ECUTUNE pistons
ECUTUNE .256 duration intake/exhaust cams
ECUTUNE STAGE 2AV1 ECU
Z32 MAF/SR20DET injectors
Balanced & Blueprinted
Reply With Quote
  #11  
Old 09-17-2010, 08:23 AM
SVXgarcia SVXgarcia is offline
Registered User
 
Join Date: Oct 2001
Location: Norwalk,CT
Posts: 234
Send a message via AIM to SVXgarcia
Re: Crank Angle Sensor 2 location pleaase?

Please post the pictures you have. I need to find out which one is crank angle sensor #2. Thank you

The diagram I posted is from Autozone
Reply With Quote
  #12  
Old 09-17-2010, 08:53 AM
1986nate 1986nate is offline
Senior Member
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Meadville, PA-but I'll still travel
Posts: 4,672
Registered SVX
Re: Crank Angle Sensor 2 location pleaase?

Quote:
Originally Posted by SVXgarcia View Post
Please post the pictures you have. I need to find out which one is crank angle sensor #2. Thank you

The diagram I posted is from Autozone
Here ya go...
Reply With Quote
  #13  
Old 09-17-2010, 09:13 AM
SVXgarcia SVXgarcia is offline
Registered User
 
Join Date: Oct 2001
Location: Norwalk,CT
Posts: 234
Send a message via AIM to SVXgarcia
Re: Crank Angle Sensor 2 location pleaase?

Thank you for the pictures. They help alot. The code i got pointed to crank angle sensor2. Why is it called #2 if there's only one crank angle sensor?
Reply With Quote
  #14  
Old 09-17-2010, 09:15 AM
1986nate 1986nate is offline
Senior Member
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Meadville, PA-but I'll still travel
Posts: 4,672
Registered SVX
Re: Crank Angle Sensor 2 location pleaase?

Quote:
Originally Posted by SVXgarcia View Post
Thank you for the pictures. They help alot. The code i got pointed to crank angle sensor2. Why is it called #2 if there's only one crank angle sensor?
Both of those sensors work as crank sensors on the SVX. Just one of them is the same type of sensor as the cam sensor. Each crank sensor serves its own specific purpose reading its own signal relaying it back to the ECU.
Reply With Quote
  #15  
Old 01-22-2011, 05:02 PM
oab_au oab_au is offline
Registered User
Subaru Gold Contributor
 
Join Date: Mar 2001
Location: Coffs Harb, Australia.
Posts: 5,032
Significant Technical Input Registered SVX
Re: Crank Angle Sensor 2 location pleaase?

Quote:
Originally Posted by SVXgarcia View Post
Thank you for the pictures. They help alot. The code i got pointed to crank angle sensor2. Why is it called #2 if there's only one crank angle sensor?
Looking at the front of the engine, there are two sensors above the crank pulley. The one on the left is No.1 crank sensor, it has the right angle bend in it. The one directly above the pulley is crank sensor No.2. This has a 45* angle bend, and is the same part number as the Cam sensor that is on the right side of the engine between the battery.

The No.1 is a SVX part only. The No.2. Crank sensor, and the cam sensor are the same as the Legacy/Impressa part.

Harvey.
__________________
One Arm Bloke.
Tell it like it is!

95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels.
97 Liberty GX Auto sedan. 320,000Kls.
04 Liberty 30R Auto Premium. 92.000kls.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122