SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
How to Remove the Plastic Wood?
Anyone know how to remove ALL of the plastic wood from the dash, console and doors? i know how to remove the radio door and the ashtry, but nothing else. If anyone could provide instructions, I'd really appreciate it. Thanks.
Larry |
#2
|
||||
|
||||
Re: How to Remove the Plastic Wood?
Go into the How-To Forum and look in the interior section.
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#3
|
|||
|
|||
Re: How to Remove the Plastic Wood?
That tells me how to remove the plastic wood around the gauge cluster which is helpful. But I still need to know how to remove it from the center stack, shifter area, and doors.
|
#4
|
||||
|
||||
Re: How to Remove the Plastic Wood?
The interior trim should just pop off and the door trim is melted to the door clad.
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress |
#5
|
||||
|
||||
Re: How to Remove the Plastic Wood?
Quote:
Lee
__________________
SVXx2 92 SVX LS-L Silver 92 SVX LS-L Burgundy (structurally challenged with 2792 miles) 96 SVX LSi Red 92 SVX LS Pearl (Parts) 01 F150 4X4 Red (+6 with other members of the family) FREEDOM IS NOT FREE |
#6
|
|||
|
|||
Re: How to Remove the Plastic Wood?
Wait... you mean the wood's not real?
Dopiest Design Blunder Award: Classy, beautiful, slightly-upscale GT coupe with real leather seats and the crummiest "woodgrain" known to modern man. dcb |
#7
|
|||
|
|||
Re: How to Remove the Plastic Wood?
Thats pretty close to what I plan on doing with my 92. I dont care for the dark wood on the 92. I found a place that does "custom dipping" which seems to provide a more realistic wood finish to the wood plastic trim.
So you've removed your plastic trim- can you give me a quick primer on how to do this? I think I get the doors (remove the door panels and remove all screws holding on the plastic) and gauge cluster (per prior response above) but I still dont know how how to do the center stack and console shift area. Do the plastic panels really just pop off? Any assistance would be appreciated. Quote:
|
#8
|
||||
|
||||
Re: How to Remove the Plastic Wood?
Quote:
Also the shifter trim should pop off. Just remove the ashtray and lift carefully.
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress Last edited by redlightningsvx; 04-22-2010 at 12:32 PM. |
#9
|
|||
|
|||
Re: How to Remove the Plastic Wood?
The plastic pegs on mine weren't melted they had a metal clip (on the few that remained intact) that clip is kind of like a tiny washer that pushes on over the plastic peg to secure it. Some clips were really rusted others just missing and some of the pegs were broken as well depending on which door panel I was on. For the clips that were there just some needle nose pliers from the bottom side and lift up should pop the clip. Most of them I was able to pull them up with my finger nails.
|
#10
|
||||
|
||||
Re: How to Remove the Plastic Wood?
The only part that will not come off without breaking it surrounds the cigarette lighter.
I had the chance to look at the dashboard of a gutted 1992 SVX that was a parts car. The dashboard was completely out and it was easy to see how everything went together. There is no way to get the plastic panel that surrounds the lighter out of the dash without removing the entire center of the dash. There are 2 screws holding it in, but only one is accessible from the outside. The other has the head of the screw facing the front of the car, but it can't be seen or felt from the ashtray opening. Some members have just snapped it off (breaking the screw mounts) and used super glue to refasten it. Maybe someone here has a photo of this part showing the mounting points that they could post. .
__________________
. Subaru Ambassador 1996 Polo Green LSi #216..138,100 miles...SOLD JFICX8659TH100216.....Date of Manufacture: November 16, 1995..... Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan In-Service Date: January 2, 1997 "The Pristine Green Polo Machine” First Polo Green on the Network First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000) First 5000K HID factory fog lights (2007) First SVX JDM BBS wheels on a USDM SVX (2013) HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler. R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 2007 Mazda Miata MX-5 PRHT...102,000 miles. Plenty of parts, service and windshields. 4th Registered Network member —2/21/2001 My NEW locker..I...My Email..I..Wikipedia/SVX . . |
Thread Tools | |
Display Modes | |
|
|