Tranny Cooler Installation Parts

[sfsvx]

After careful research and contemplation, I've finally decided to install my tranny cooler in front of the AC condenser, and in parallel with the stock cooler. I won't go into my reasons for this, let's just assume that's what I'm going to do and there's no need to discuss it any further.

I need some "T" or "Y" fittings that fit the hoses to both coolers - the inside diameter looks like about 5/16" - and I can't find any that are suitable. Obviously I'm looking in the wrong places.

Does anybody know where one goes to find something like that? I'd appreciate any suggestions.

[lee]

My cooler spec'ed 11/32 id hoses so for a T or Y it should be the same. Ts are available at my local auto parts chain - Discount Auto Parts, so I would think any decent parts house will have them. I have also seen them at Ace Hardware, but not sure if that's a standard thing, my local store seems to carry a lot of plumbing/fluid parts (maybe a fourth of the store).

[sfsvx]

Thanks,Lee - I don't know why it never entered my mind to go to an auto parts store for these, but it didn't. AutoZone had them, so did NAPA. I'd looked at a few hardware stores and they didn't have the right size or it wasn't suitable for the heat.

I am now a happy camper. Thanks again for the help.