SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Need help removing the rear bumper
Hey guys, I've been trying to remove my rear bumper because it's going into the shop for some body work tomorrow, and I want to remove the rear bumper so it gets repainted properly.
I removed the four bolts in the trunk already and it seems as if it's loose but it won't slide out, does anyone know how to pull it out?
__________________
'97 Ebony Pearl SVX Lsi Current Mods: K&N Filter, -18x8" Konig Hotswaps with Nexen Tires -Polyurethene swaybar bushings -iRotor Drilled/Slotted zinc plated rotors, ceramic disc pads, stainless steel braided blue covered brake lines, powder coated calipers. Soon - Custom Headers, Cold Air Intake, and Custom Magnaflow Exhaust *New addition*2000 Volkswagon Golf TDi (don't worry, it's my new winter beater, gives me more money in my pocket(less gas) and I can park my car for longer periods of time giving me time to work on it and less damage to the SVX from winter driving) |
#2
|
||||
|
||||
You also have two small nuts on either side of the trunk, nuts under the bumper, and two screws on either side of the wheel well.
|
#3
|
||||
|
||||
He got it. I went over with my FSM's and helped him remove the rear bumper.
His 97 is going in for paint today. Hope they do a better job than what the last owner had done to his car.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
|
|