SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Front License Plate Hardware Specs
I had to get my plates switched over to Illinois from KY meaning I now need the ugly front license plate. So I ordered the license plate bracket from Subaru, but did not realize the hardware needed to be ordered separate. Since I really need the plates on the car ASAP and don't really want to pay for shipping for just 6 bolts from Subaru,
Does anyone have the specs for the bolts that mount the bracket to the car and also that attach the plate to the bracket. Don't have a large selection of hardware to try to find a fit by trial and error either. Thanks for any insight!
__________________
'94 Barcelona Red LSi - Daily driver, future project |
#2
|
||||
|
||||
Re: Front License Plate Hardware Specs
M8 x 1.25 x 25mm bolts connect the holder to the threaded holes in the recessed area of the front bumper. A longer bolt will probably work too You'll need to clean out the threaded hole and maybe even tap it clean if it has been soaked in years worth of grime and winter salt.
|
|
|