Need help asap installing clear lenses

[Landshark]

Originally Posted by Ricochet

It would be 100x easier if you use a sandwheel dremel with adjustable speeds. No heating up of the silicone required - just take out the entire housing, saw off the old lense, and glue on the new one. Viola.

...and that's how you do it. i wouldn't try using a hacksaw, lawnmower, or chipper-shredder.

Dremels (and other brands of rotary tools) are cheap and have other good uses, too.

[SilverSpear]

I used a small grinder with a cutting disc. Set the grinder speed at "low" and do it very easily...