The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 01-17-2005, 09:29 PM
92SVXMan's Avatar
92SVXMan 92SVXMan is offline
Registered User
 
Join Date: Oct 2004
Location: Poughkeepsie,NY
Posts: 54
Slider Pulley?

I am a Newbie so please bear with me, I have a Chilton's book (which i think sucks) but it calls the Tension adjustor a "Slider Pulley"? I have checked the parts stores online and can not find this part listed, are there other names for this part. My Crankshaft Pulley came apart and i want to fix everything in one go, also have a oil leak so want to pull the oil pump too. But i need this part number to replace the Bearing on the slider bolt.
Thank for the help.
__________________
_______________
92svxman & Freida the co-pilot.
First 92 Claret(flat color,IMHO)
Two 92 Teal(much nicer color)
5 Speed pending, from 93 Legacy Turbo
4.11 Tranny/rear diff. May go for 3.90
Claret 145K
Underdrive Pulley from Newbies2005
New timing belt
new radiator
new water pump
new timing belt cover
New headlights and harness
Replaced exhaust (with stock)
Life on the road who could ask for more
Reply With Quote
  #2  
Old 01-17-2005, 11:35 PM
ensteele's Avatar
ensteele ensteele is offline
Betcha can't buy just one!
Alcyone Gold Contributor
 
Join Date: Jan 2002
Location: Burlington, WA
Posts: 19,552
Send a message via ICQ to ensteele Send a message via Yahoo to ensteele Send a message via Skype™ to ensteele
Registered SVX Classic SVX
Try looking here.

Good luck with it.
__________________
.
Earl .... ... .... ><SVX(*>

Subaru Ambassador

[COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430
1992 Dark Teal LS-L ~184K (05/91) #0739
1992 Claret LS-L ~196K (05/91) #0831
1992 Pearl LS-L ~103K (06/91) #1680
1992 Pearl LS-L ~151K (06/91) #2229
1992 Dark Teal LS ~150K (07/91) #3098 (parts car)
1992 White LS-L ~139K (08/92) #6913
1993 25th AE ~98K (02/93) #164
1993 25th AE ~58K (02/93) #176
1993 25th AE ~107K (02/93) #215
1993 25th AE ~162K (02/93) #223
1994 Laguna Blue Pearl LSi ~124K (1/94) #2408
1994 Laguna Blue Pearl LSi ~144K (10/93) #1484
1994 Laguna Blue Pearl LSi ~68K (10/93) #1525
1994 Barcelona Red LSi ~46K (02/94) #2624
1994 Pearl LSi ~41K (12/93) #1961
1995 Bordeaux Pearl LSi ~70K (02/95) #855
1996 Polo Green LSi ~95K (03/96) #872
1997 Bordeaux Pearl LSi ~55K (08/96) #097
2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951
1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420

My Email | Old Locker | New Locker | Picture of 15 of the 19
Reply With Quote
  #3  
Old 01-18-2005, 10:52 AM
92SVXMan's Avatar
92SVXMan 92SVXMan is offline
Registered User
 
Join Date: Oct 2004
Location: Poughkeepsie,NY
Posts: 54
Quote:
Originally posted by ensteele
Try looking here.

Good luck with it.
What i am trying to say is that i have been to Subaruparts.com and 1stSubaruparts.com and can not find the part, or the part# for the Bearing for the Slider Pulley. Getting to Subaruparts.com is no problem, everything else is.
__________________
_______________
92svxman & Freida the co-pilot.
First 92 Claret(flat color,IMHO)
Two 92 Teal(much nicer color)
5 Speed pending, from 93 Legacy Turbo
4.11 Tranny/rear diff. May go for 3.90
Claret 145K
Underdrive Pulley from Newbies2005
New timing belt
new radiator
new water pump
new timing belt cover
New headlights and harness
Replaced exhaust (with stock)
Life on the road who could ask for more
Reply With Quote
  #4  
Old 01-18-2005, 11:25 AM
dcarrb dcarrb is offline
Registered User
 
Join Date: Nov 2003
Location: none
Posts: 3,430
If you're referring to (what I call) idler pulleys for belt tensioning, I doubt Subaru carries replacement bearings for these; they'd rather you buy the whole assembly. Pretty sure I've read here of someone disassembling and repacking (or replacing?) these, though. You might want to do a search. Good luck.

dcb
Reply With Quote
  #5  
Old 01-18-2005, 01:08 PM
Earthworm's Avatar
Earthworm Earthworm is offline
Meow!
 
Join Date: Mar 2002
Location: Winnipeg, Manitoba
Posts: 11,957
Send a message via ICQ to Earthworm Send a message via AIM to Earthworm Send a message via MSN to Earthworm Send a message via Yahoo to Earthworm Send a message via Skype™ to Earthworm
My dad just replaced the bearing in mine. He did it while I was waiting for the replacement pulley from Subaru. I'm not sure where he got the bearing from.
Reply With Quote
  #6  
Old 01-19-2005, 08:17 PM
92SVXMan's Avatar
92SVXMan 92SVXMan is offline
Registered User
 
Join Date: Oct 2004
Location: Poughkeepsie,NY
Posts: 54
Pulley Assembly

I have been looking for the "Pulley Assembly-Idle Air Conditioner" Part# 73015PA000 which cost $42.37; S&H $7.95 so thats $50.32, but all i need is the Bearing which i found for$8.00 plus $1.16 taxes. What i did find out was that the Pulley was put on backwards, and that was why my A/C belt broke just before the crankshaft pulley came apart. I now have an Underdrive Pulley for the crank, and a new Timing belt to put on after i replace the O-ring behind the Oil Pump along with the oil pump seal. I just don't want to take the Timing belt off again any time soon. Thanks for all the help.
Drive fast, be safe and be happy.
__________________
_______________
92svxman & Freida the co-pilot.
First 92 Claret(flat color,IMHO)
Two 92 Teal(much nicer color)
5 Speed pending, from 93 Legacy Turbo
4.11 Tranny/rear diff. May go for 3.90
Claret 145K
Underdrive Pulley from Newbies2005
New timing belt
new radiator
new water pump
new timing belt cover
New headlights and harness
Replaced exhaust (with stock)
Life on the road who could ask for more
Reply With Quote
  #7  
Old 01-20-2005, 09:15 AM
AFBeefcake's Avatar
AFBeefcake AFBeefcake is offline
Subaru Swapper
 
Join Date: Aug 2002
Location: Griswold, CT
Posts: 1,779
Send a message via AIM to AFBeefcake
Do you have a part number off the bearing you used, and where did you get it.

I've been tring to track this down for some time now.
__________________
2005 Legacy GT
2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles
My WRX's Cardomain Page
Reply With Quote
  #8  
Old 01-20-2005, 09:49 AM
92SVXMan's Avatar
92SVXMan 92SVXMan is offline
Registered User
 
Join Date: Oct 2004
Location: Poughkeepsie,NY
Posts: 54
Thumbs up Pulley bearings

There is only one nut that holds the pulley in place, undue nut belt will go loose and remove the wheel and bring it to a shop that rebuilds starters/Alt. and there set you up for under $10. You can also bring it to NAPA and let them look it up, but in either case its going to be cheaper then getting it from Subaru. Good luck. let me know how it goes.
__________________
_______________
92svxman & Freida the co-pilot.
First 92 Claret(flat color,IMHO)
Two 92 Teal(much nicer color)
5 Speed pending, from 93 Legacy Turbo
4.11 Tranny/rear diff. May go for 3.90
Claret 145K
Underdrive Pulley from Newbies2005
New timing belt
new radiator
new water pump
new timing belt cover
New headlights and harness
Replaced exhaust (with stock)
Life on the road who could ask for more
Reply With Quote
  #9  
Old 01-20-2005, 01:53 PM
Earthworm's Avatar
Earthworm Earthworm is offline
Meow!
 
Join Date: Mar 2002
Location: Winnipeg, Manitoba
Posts: 11,957
Send a message via ICQ to Earthworm Send a message via AIM to Earthworm Send a message via MSN to Earthworm Send a message via Yahoo to Earthworm Send a message via Skype™ to Earthworm
Subaru will only sell you the entire pulley p/n: 34413PA000 for $38.06 on subaruparts.

Reference Link

According to the PM I received:
Quote:
It says 6202LU made in taiwan tpi
Reply With Quote
  #10  
Old 01-20-2005, 01:58 PM
AFBeefcake's Avatar
AFBeefcake AFBeefcake is offline
Subaru Swapper
 
Join Date: Aug 2002
Location: Griswold, CT
Posts: 1,779
Send a message via AIM to AFBeefcake
I think I can get those at work. I'll have to check.

Info I found on this bearing.
Its a standed size
6202 LU
Bore 15mm OD 35mm W 11mm
15,000 RPM max
Contact Sealed Type
__________________
2005 Legacy GT
2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles
My WRX's Cardomain Page

Last edited by AFBeefcake; 01-20-2005 at 02:13 PM.
Reply With Quote
  #11  
Old 01-20-2005, 03:33 PM
92SVXMan's Avatar
92SVXMan 92SVXMan is offline
Registered User
 
Join Date: Oct 2004
Location: Poughkeepsie,NY
Posts: 54
Thumbs down 6202 Bearing

Quote:
Originally posted by Earthworm
Subaru will only sell you the entire pulley p/n: 34413PA000 for $38.06 on subaruparts.

Reference Link

According to the PM I received:
Sorry to tell you but the 6202lu bearing is for the Alt. and not the power steering. The P/S bearing is smaller.
__________________
_______________
92svxman & Freida the co-pilot.
First 92 Claret(flat color,IMHO)
Two 92 Teal(much nicer color)
5 Speed pending, from 93 Legacy Turbo
4.11 Tranny/rear diff. May go for 3.90
Claret 145K
Underdrive Pulley from Newbies2005
New timing belt
new radiator
new water pump
new timing belt cover
New headlights and harness
Replaced exhaust (with stock)
Life on the road who could ask for more
Reply With Quote
  #12  
Old 01-20-2005, 03:37 PM
92SVXMan's Avatar
92SVXMan 92SVXMan is offline
Registered User
 
Join Date: Oct 2004
Location: Poughkeepsie,NY
Posts: 54
Cool The Bearing

Quote:
Originally posted by AFBeefcake
I think I can get those at work. I'll have to check.

Info I found on this bearing.
Its a standed size
6202 LU
Bore 15mm OD 35mm W 11mm
15,000 RPM max
Contact Sealed Type
This is for the Alt. The P/S bearing is smaller. Good luck.
__________________
_______________
92svxman & Freida the co-pilot.
First 92 Claret(flat color,IMHO)
Two 92 Teal(much nicer color)
5 Speed pending, from 93 Legacy Turbo
4.11 Tranny/rear diff. May go for 3.90
Claret 145K
Underdrive Pulley from Newbies2005
New timing belt
new radiator
new water pump
new timing belt cover
New headlights and harness
Replaced exhaust (with stock)
Life on the road who could ask for more
Reply With Quote
  #13  
Old 01-20-2005, 03:41 PM
AFBeefcake's Avatar
AFBeefcake AFBeefcake is offline
Subaru Swapper
 
Join Date: Aug 2002
Location: Griswold, CT
Posts: 1,779
Send a message via AIM to AFBeefcake
O well I'll have to take the pully off when I rebuld my power steering pump.
__________________
2005 Legacy GT
2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles
My WRX's Cardomain Page
Reply With Quote
  #14  
Old 01-20-2005, 04:13 PM
Earthworm's Avatar
Earthworm Earthworm is offline
Meow!
 
Join Date: Mar 2002
Location: Winnipeg, Manitoba
Posts: 11,957
Send a message via ICQ to Earthworm Send a message via AIM to Earthworm Send a message via MSN to Earthworm Send a message via Yahoo to Earthworm Send a message via Skype™ to Earthworm
I thought you were referring to the tensioner pulley bearing?
Reply With Quote
  #15  
Old 01-20-2005, 04:18 PM
AFBeefcake's Avatar
AFBeefcake AFBeefcake is offline
Subaru Swapper
 
Join Date: Aug 2002
Location: Griswold, CT
Posts: 1,779
Send a message via AIM to AFBeefcake
yes, tensioner pulley bearing. I want to replace that at the same time as rebulting my power steering pump.
__________________
2005 Legacy GT
2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles
My WRX's Cardomain Page
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122