The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:
SVXBot

Go Back   The Subaru SVX World Network > Regional SVX Forum & Clubs > Down Under

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 10-07-2017, 06:51 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,282
Spare connector - what is it for?.

OK - so took out the glove box on my RHD 95 OBD1 (to change over the cruise control module - CC has not worked for over 10 years).

Only to find a spare connector, it is 8-way / 3-pin - looks like it should connect to something that is missing on the metal bracket below it ?.

Any guesses as to what it might be for?.
Attached Images
File Type: jpg spare connector.jpg (363.9 KB, 17 views)
__________________
1995 LSI, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow Polish bushes includes 15 min mod (90SH fitted), R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #2  
Old 10-10-2017, 02:55 AM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,282
Re: Spare connector - what is it for?.

so I guess I am the only person with this spare connector?
__________________
1995 LSI, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow Polish bushes includes 15 min mod (90SH fitted), R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #3  
Old 10-17-2017, 08:21 AM
Svx95's Avatar
Svx95 Svx95 is offline
eg33svx95
 
Join Date: Jun 2011
Location: Yankton, SD
Posts: 240
Registered SVX
Re: Spare connector - what is it for?.

That looks like the connector for the door lock timer module.
__________________
Sam
Brilliant Red 95 SVX L AWD 149K miles - #904/1801, 08 STI 6MT with DCCD & VSS, ACT SB10 HDSS, 6MT bushings, DW200 Fuel pump, 17x7.5 VX-SCYTHE Wheels, 17x8 BBS STI Wheels,PERRIN CRANK PULLEY, 911 Turbo oil filter,$15/15min MOD & $20/20min Mod, Brontrager WORKS 22mm RSB w/ QS component endlinks, SS Brake Lines, DDM TUNING 6000K HID LOWS, Hella Optilux Extreme Yellow Fog Lights,Window scratcher fix, JDM Clear Corners

My Locker
Reply With Quote
  #4  
Old 10-21-2017, 01:11 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,282
Re: Spare connector - what is it for?.

thanks for that - will look into it today, I have a couple of them here, is it part of the security system?.
__________________
1995 LSI, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow Polish bushes includes 15 min mod (90SH fitted), R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #5  
Old 10-21-2017, 06:51 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,282
Re: Spare connector - what is it for?.

OK so it looks like the Timer for Door Lock (what ever that is ?).

The module I have is from USA and uses all 8 pins, the mating part on my car only has 3 wires?.

Will try and reverse engineer the PCB from module later on tomorrow.

Can someone in NZ or AUS please check under and to the left of the glove box to see a) how many wires comes from their connector and b) what the module p/n is.

TIA
Attached Images
File Type: jpg 20171022_091743.jpg (300.0 KB, 0 views)
File Type: jpg 20171022_091805.jpg (309.2 KB, 0 views)
File Type: jpg 20171022_091828.jpg (324.2 KB, 0 views)
File Type: jpg 20171022_134156.jpg (319.1 KB, 0 views)
File Type: jpg 20171022_134349.jpg (355.3 KB, 0 views)
__________________
1995 LSI, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow Polish bushes includes 15 min mod (90SH fitted), R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
  #6  
Old Yesterday, 03:23 PM
SURTEESS's Avatar
SURTEESS SURTEESS is offline
Registered User
 
Join Date: Oct 2006
Location: Auckland, New Zealand
Posts: 1,282
Re: Spare connector - what is it for?.

Yes finally figured out what I actually have -

1x Center console, door lock/unlock switch
1x Under dash door lock timer

and I have found the circuit to wire them together ----- all I am still requiring is the switch mating connector.....anyone wanting to get around the U Pull yards and get me one with a short length of OEM wiring?.
__________________
1995 LSI, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow Polish bushes includes 15 min mod (90SH fitted), R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
2001-2015 SVX World Network
(208)-906-1122