ECUtune Stage III development

[longassname]

Hey Paul,

Great to have you on board. Yes, I need the manifold, the black cast iron alternator/ac compressor bracket which has the engine pulling loop on it, and the metal fuel lines which are underneath the manifold. If you are looking to order a kit I'll be taking the orders for the second batch towards the end of January when we are finished with the first batch. There is a thread titled ECUtune Stage III twin screw supercharger sign up where I've shown the fabrication thus far of the first batch. We've made some notable improvements over the prototype system and I'm working on pulling it all together to send out for finishing now. You'll be able to watch as I finish up in that thread here: http://www.subaru-svx.net/forum/show...=25555&page=26

hello to all, I write from Italy and I am using the translator of ....... me you explain how many HP are earned with this Ecu?

[Duckie]

right now we are looking at a projected 415 horsepower on the final map. It might come in a little less or little more.

[NikFu S.]

It would be wise to point out the system's power output is variable, entirely dependent on pulley size and engine condition.

The 415 projection was acheived on a motor with factory internals at 12 pounds of boost.

Further details available at the active stage 3 thread: http://www.subaru-svx.net/forum/show...=25555&page=46

[longassname]

woops i was posting in the wrong thread

[Shadowyng]

Feeling the strain of reading 47 pages of test at a clip.

So other than running the prototype has anyone jumped on board for this amazingly well thought out and executed mod?

First thing for me is replacing the rear bearings again.. Curses!

[mikecg]

Check under the Supercharged forums. Several of the kits have been shipped. I am running mine and TomsSVX has his installed. I think there are a few others that have received theres but are still working on getting them installed. We, myself and Tom, are planning on making a dyno run on the 16th of November. Tom is running 12lbs of boost and I'm running 9lbs.

[Shadowyng]

Disregard my rantings...SW THAT THERE WAS ANOTHER THREAD THAT ANSWERED MY QUESTIONS......

[Myxalplyx]

Originally Posted by mikecg

We, myself and Tom, are planning on making a dyno run on the 16th of November. Tom is running 12lbs of boost and I'm running 9lbs.

Where are you planning on making this dyno run? What time? (If you don't mind me asking).
I'd like to join you guys if someone (Perhaps Tom who has his hands full) could install a wet nitrous kit before then.

[SVXRide]

Originally Posted by Myxalplyx

Where are you planning on making this dyno run? What time? (If you don't mind me asking).
I'd like to join you guys if someone (Perhaps Tom who has his hands full) could install a wet nitrous kit before then.

Kevin,
Check the date of the post....it was the 16th of November of last year (2006). MikeCG is now out in Los Vegas.
My guess is that their will be dyno runs in the future
-Bill

[Myxalplyx]

Originally Posted by SVXRide

Kevin,
Check the date of the post....it was the 16th of November of last year (2006). MikeCG is now out in Los Vegas.
My guess is that their will be dyno runs in the future
-Bill

***Slaps Head*** Sorry! It has been a very long day today.

[superru]

Hey mike will the stage III charger system pass a standard "up the pipe" sniffer test?

[longassname]

I'm sure it will..in fact I think it has..but it's not something I'm offering anymore.

Originally Posted by superru

Hey mike will the stage III charger system pass a standard "up the pipe" sniffer test?

[superru]

ahh have i been gone that long?

[Nomake Wan]

So... did you guys ever get those dyno runs in?