SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
|||
|
|||
yes, yes, ANOTHER ram air thread
alright, so im toying with ideas for an intake on my sitting on jackstands svx. i was thinking something along the lines of xxtunings eg33 powered impreza, but dont want to deal with the changeing to MAP sensor, and required things, and wouldnt be able to get a strut tower brace in there then, and useing a maf sensor with that style would require waaay tomany sharp bends in the tubing, and to little clearance. so i was thinking of doing the tomyx intake idea(or the actual piece) running to the maf, that ataches to an air box that hasthe flat panel filter sitting on top, that is force fed air via a side mounted scoop or a custom NACA duct, though i dont know if this will produce enough pressure, but am hopefull. anyhow, when the hood closes, it will seal the scoop/duct channel with the top of the air box, with the filter sitting on top, and the maf sensor attached to the back of the box, makeing a relitively not very "bendy" intake with good air flow. any ideas, comments, flames or anything? im heading out for my daily coffee, cigerettes and conversation break right now, ill draw a diagram as to explain whats going on exactly incase anyone is wondering. i know, intakes can be a contraversial subject, but isnt experimentation one of the best parts of owning this car?!?!
|
#2
|
||||
|
||||
Ram air on the SVX is rather limited due to the low hood line and the rear mounted TB. This doesn't mean there aren't those of us that are looking at ways around these limitations
-Bill
__________________
Retired NASA Rocket Scientist Most famous NASA "Child" - OSIRIS-REx delivered samples from asteroid BENNU to Earth in Sept. 2023 Center Network Member #989 '92 Fully caged, 5 speed, waiting for its fully built EG33 '92 "Test Mule", 4:44 Auto, JDM 4:44 Rear Diff with Mech LSD, Tuned headers, Full one-off suspension '92(?) Laguna, 6 spd and other stuff (still at OT's place) My Locker |
#3
|
|||
|
|||
alright, so i drew this out while enjoying some delicious coffee(not really, it was terrible, if your ever in kenosha, wi, dont go out to marina gardens on the lake front, its like motor oil) anyhow, the pictures arent very good, as its been over a year since i tried to draw out anything technical, or draw out anything for that matter. the hood design hasnt been fully thought out, i was working mainly on the intake itself. if anyone has any comments, good, bad or worse, and any suggestions or input, please do so, as i would like everyones opinion. the top of the airbox will be sealed to some sort of air tunnel drawing air directly from outside. ill have a cap off for any heavy rain/snow etc. sorry its so big, i wanted to make sure my writing was legibe
|
#4
|
|||
|
|||
well, i guess technically, this wouldnt be ram air, or would it?
|
#5
|
|||
|
|||
*bump*
really, no comments? flames? advice? nothing? |
#6
|
||||
|
||||
So basicly it's similar to the stock design, but rather than the piping continuing into the fender, you'd like it to seal against the hood and put a scoop in?
It seems like it would work well. I like the airbox D design, it seems about as well thought out as possible. I say go for it. get some materials and spend a few days crafting, fitting, re-designing, ect.
__________________
R.I.P Cool Signature. You're gone but not forgotten. I mean, sure, I kindof don't remember some of the finer details..but I remember you were funny, and at one point you said spaghetti in Dutch....but definantly not forgotten |
|
|