SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
All Subaru 90's 4EAT AT axles the same?
Driver's side is pretty much gone AGAIN. Not too bad for how much abuse I've given it in the last what 3 years. Anywho. I've got axles sitting here from my 97' OBS 4eat. Will they work? If they do GREAT! If not... Impreza is getting it's 6mt in soon anyways and hasn't been driven in like 2 years. It won't miss them and will mean I have spares for when the other side goes.
__________________
94 Bordeux Pearl LSi (Jun 2009) 109k Plate:GADDIS What they call it a vanity-plate. Shouldn't I be obligated to be vane with it? Rota Tarmac 3's 18x8" on 245/40/18 Dunlop SP Sport 600's, Perrin light weight crank pulley, PRW radiator, custom coilovers(not GC's), 9006 HID 4300k 50W low beams, DIY garage door lip, and SVXfiles brake kit. Fixxed exhaust so no more sweet sound. 97 White/Black trim Impreza Outback Sport (March 13/08) 150K-180K(sensor broken)Good news is EZ30R and 05' 6speed full powertrain swap is in motion!: Will be doing more work as I can. Gonna be run by a Hydra so yeah fun to be had. [SIGPIC][/SIGPIC] -Gaddis |
#2
|
|||
|
|||
Re: All Subaru 90's 4EAT AT axles the same?
As far as I know all 4EAT axles are 25 spline axles except for FWD Impreza axles (23 spline like the old EA81 and EA82 axles) So the inner joint cup will fit, the different may be found in the outer DOJ, I havent had my wheel bearings apart yet on my SVX so I'm not sure if the diameter of the hub splines are bigger or not. OB and SVX weigh about the same, so they could use similar sized bearings/hubs.
Not quite the answer you were lookin for, but it is some info on the subject |
#3
|
||||
|
||||
Re: All Subaru 90's 4EAT AT axles the same?
They weigh no where near the same...
SVX is a ****ING PIG! Legacy or Impreza OB's both are WAY lighter. But that's all I needed to know. I've got my old axles nexto tonthe car. I'll pull one of the Impreza's ones and check the two next to each other. Just didn't want ti be checking the spline count after pulling out ofte SVX to find out I am SOL.
__________________
94 Bordeux Pearl LSi (Jun 2009) 109k Plate:GADDIS What they call it a vanity-plate. Shouldn't I be obligated to be vane with it? Rota Tarmac 3's 18x8" on 245/40/18 Dunlop SP Sport 600's, Perrin light weight crank pulley, PRW radiator, custom coilovers(not GC's), 9006 HID 4300k 50W low beams, DIY garage door lip, and SVXfiles brake kit. Fixxed exhaust so no more sweet sound. 97 White/Black trim Impreza Outback Sport (March 13/08) 150K-180K(sensor broken)Good news is EZ30R and 05' 6speed full powertrain swap is in motion!: Will be doing more work as I can. Gonna be run by a Hydra so yeah fun to be had. [SIGPIC][/SIGPIC] -Gaddis |
#4
|
||||
|
||||
Re: All Subaru 90's 4EAT AT axles the same?
Go to your local parts store and ask to have a look at their book(s). I noticed that the front SVX CV axles are pretty common among Subaru's. Sorry I cant remember exactly. But thats how I got mine after they told me that they didnt offer them for SVX's. Stupid parts counter guys
|
#5
|
|||
|
|||
Re: All Subaru 90's 4EAT AT axles the same?
The whole axle is bigger when compared to legacy or impreza. In fact, the 2WD axles are larger than the AWD axles if I remember right. The joints are tougher.
__________________
2007 GS 450h-Active Stabilizer/Radar cruise 1994 L Blue 3.70 VTD ASE Master Automobile ASE Advanced Level Specialist Toyota Master Diagnostic Technician (former life) |
#6
|
|||
|
|||
Re: All Subaru 90's 4EAT AT axles the same?
I'll have to take a closer look when I work on my laguna next. and take a look at one of my other 2. I would definitely be able to confirm this.
|
#7
|
||||
|
||||
Re: All Subaru 90's 4EAT AT axles the same?
This is a post from when I replaced mine..
CV axle replaced. Simple and easy! BTW if any parts store tells you they dont have one for your AWD SVX, tell them they are exactly the same as the FWD ones. This was confirmed by using the book. The parts guy seemed very annoyed when I asked to see his FENCO & GSP book. Then I confirmed fitment (same as the late 90's 2.5rs and a few others) and was on my way. Only cost $69 for a brand new one. |
#8
|
|||
|
|||
Re: All Subaru 90's 4EAT AT axles the same?
Quote:
__________________
2007 GS 450h-Active Stabilizer/Radar cruise 1994 L Blue 3.70 VTD ASE Master Automobile ASE Advanced Level Specialist Toyota Master Diagnostic Technician (former life) |
#9
|
||||
|
||||
Re: All Subaru 90's 4EAT AT axles the same?
Quote:
The real part? Really? If it fits and we can get our hands on it, then that makes it "real" enough. Does it really matter if the band claps are different or the boot material is other than OEM type? Ummm no. I mean, really.... Parts supply dwindles for these cars daily. No nice way to put it. Ya got to take what you can get. And that is REAL. |
|
|