Pwr radiatorin but...

[Crazypolo95]

So i finally got it in the car but the one thing that is really on my mine it the cooling fan is about 1mm -3mm from the drive blets. Need info on how to make more room or what anyone has done to fix this?

[kwren]

what is it?

Keith

[Crazypolo95]

the part that was put on was the PWR radiator. but the part that is hitting i think is the middel of the cover for the fan



QUOTE=kwren;604138]what is it?

Keith [/QUOTE]

[kwren]

Still a bit confused... I can't place a fan cover on the SVX.
Are sure it is a SVX?

Keith

[Crazypolo95]

yeah my back here is what i'm talking about

the part is N60009. i have about 3 mm from the power systeming pulley. if this doesn't work man back


http://www.subaruparts.com/diag/?mod...ategory=450A-1

Originally Posted by kwren

Still a bit confused... I can't place a fan cover on the SVX.
Are sure it is a SVX?

Keith

[svxfiles]

Originally Posted by Crazypolo95

So i finally got it in the car but the one thing that is really on my mine it the cooling fan is about 1mm -3mm from the drive blets. Need info on how to make more room or what anyone has done to fix this?

The first thing that I would do is to remove the bottom "bumpers/mounts" from the radiator support, (the big black rubber donuts)
and using a kitchen knife, shave the top 1/4" off of it.

Now the PWR sits lower.

I usually drill the mounting bracket hole out bigger,
(where the mounting bolts go)
so that I can slide the top mounts forward.

Lastly I bend the top mount in two places to give it more pressure on the radiator, and can change the angle of said radiator for more clearance.

I hope that helps.

[kwren]

My x-brother-in-law was from Alabama.

Keith

Think it was Baymonet. Not spelled right, but that is just me.

[Crazypolo95]

thank you. thats what i need.

Originally Posted by svxfiles

The first thing that I would do is to remove the bottom "bumpers/mounts" from the radiator support, (the big black rubber donuts)
and using a kitchen knife, shave the top 1/4" off of it.

Now the PWR sits lower.

I usually drill the mounting bracket hole out bigger,
(where the mounting bolts go)
so that I can slide the top mounts forward.

Lastly I bend the top mount in two places to give it more pressure on the radiator, and can change the angle of said radiator for more clearance.

I hope that helps.

[kwren]

Originally Posted by Crazypolo95

thank you. thats what i need.

You are sure welcome!

Keith