The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 03-21-2011, 08:51 PM
NSTG8R's Avatar
NSTG8R NSTG8R is offline
Airplane builder-upper
 
Join Date: Feb 2007
Location: Pacific, MO
Posts: 59
Is it possible?

Okay, I'm swapping the noisy lifters on my '92....or attempting to since whoever changed the timing belt last apparently used an impact wrench to torque all of the bolts on the crank and cam sprockets. After bending my 1/2" breaker bar, the crank bolt finally came off...the cam sprockets are still giving me hell. My question is, is it possible to over torque the bolt so hard that the crank would make contact with the belt cover? I did some searches here, and they talked about a warped cover. Mine was on tight, and showed no obvious signs of warpage, and the pulley itself still looks good...rubber-wise.
__________________
He who hesitates is not only lost, but miles from the next exit.
Reply With Quote
  #2  
Old 03-21-2011, 09:00 PM
Freeman's Avatar
Freeman Freeman is offline
Unregistered User
 
Join Date: Dec 2007
Location: Cumberland, Maryland
Posts: 1,924
Send a message via MSN to Freeman
Registered SVX
Re: Is it possible?

__________________
1992 Pearl White LS-L "Ruslana" #4946 - 180k on body, 95k on engine.
Mods: ECU bead crush, 15 min mod, 20 min mod, drilled/slotted rotors & Axxis ceramic brakes, SS lines, 17" Evoke F1 wheels, XS-HF137 Sony Xplod speakers, 6000k HID's (lows & fogs), resistor mod, 1½" Sleek Spoiler mod, custom exhaust by svxfiles, '02 WRX aluminum racing radiator by svxfiles, Summit Racing 400# x 300# springs w/ Koni's by svxfiles, ClassGlass fiberglass hood /w scoop, Nevin's rear sway bar, '97 grille, phenolic spacers, custom LED interior lighting, custom paint.
†"War doesn't determine who is right, only who is left"†
Work to be done: Tinted windows, clear/LED tail lights, tailbar mod, "Power Mode" mod, Supertone horns, clear corners & headlight lenses, 2 pc splitters or custom bumper, Alcyone side skirts, TruSpeed Stage III SVX Intake, Hydra, 4.44 tranny swap, JDM auto folding side mirrors, engine rebuild, super charger, STi seats, bone leather interior /w SVX emblem, dash overhaul, SVX decals, paint (stock color). Total cost?: 22k At least it's going down..
Reply With Quote
  #3  
Old 03-22-2011, 03:43 PM
NSTG8R's Avatar
NSTG8R NSTG8R is offline
Airplane builder-upper
 
Join Date: Feb 2007
Location: Pacific, MO
Posts: 59
Re: Is it possible?



That's what I thought....just had to run it through the "pool of SVXperts" to see if I was missing something obvious.
__________________
He who hesitates is not only lost, but miles from the next exit.
Reply With Quote
  #4  
Old 03-22-2011, 06:28 PM
Freeman's Avatar
Freeman Freeman is offline
Unregistered User
 
Join Date: Dec 2007
Location: Cumberland, Maryland
Posts: 1,924
Send a message via MSN to Freeman
Registered SVX
Re: Is it possible?

It actually may be possible depending on the svx. My whole front end was smooshed in once.
__________________
1992 Pearl White LS-L "Ruslana" #4946 - 180k on body, 95k on engine.
Mods: ECU bead crush, 15 min mod, 20 min mod, drilled/slotted rotors & Axxis ceramic brakes, SS lines, 17" Evoke F1 wheels, XS-HF137 Sony Xplod speakers, 6000k HID's (lows & fogs), resistor mod, 1½" Sleek Spoiler mod, custom exhaust by svxfiles, '02 WRX aluminum racing radiator by svxfiles, Summit Racing 400# x 300# springs w/ Koni's by svxfiles, ClassGlass fiberglass hood /w scoop, Nevin's rear sway bar, '97 grille, phenolic spacers, custom LED interior lighting, custom paint.
†"War doesn't determine who is right, only who is left"†
Work to be done: Tinted windows, clear/LED tail lights, tailbar mod, "Power Mode" mod, Supertone horns, clear corners & headlight lenses, 2 pc splitters or custom bumper, Alcyone side skirts, TruSpeed Stage III SVX Intake, Hydra, 4.44 tranny swap, JDM auto folding side mirrors, engine rebuild, super charger, STi seats, bone leather interior /w SVX emblem, dash overhaul, SVX decals, paint (stock color). Total cost?: 22k At least it's going down..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122