SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Select Monitor Plugs needed for ECU project
I need three of the yellow 9-pin Select Monitor plugs from the driver's footwell. Diagnostics connector B35 on the FSM wiring diagrams.
I need them to make up a special cable that will allow a subaru select monitor and a PC to be connected to the car at the same time. The PC will be able to eavesdrop on the conversation between the car and the select monitor. This will allow us to compile a definitive list of the ECU parameters that can be used in VWRX, Evoscan and any other data loggers. It will also help with understanding how the ECU works internally. TomSVX has kindly offered to carry out the experiment with his laptop and select monitor, so it's waiting on me building the cable. If anybody has a parts car with a spare connector they would like to sell or donate, please send me a PM or email. Phil.
__________________
Subaru ECU and TCU Website 1992 Alcyone SVX Version L 1992 Alcyone SVX Version L 1994 Alcyone SVX S40-II 2004 Subaru Legacy 2.5 SE Sports Tourer 1996 Subaru Legacy 2.2 GX Wagon 1988 Subaru Justy J12 SL-II |
#2
|
||||
|
||||
Re: Select Monitor Plugs needed for ECU project
Quote:
Tom |
#3
|
||||
|
||||
Re: Select Monitor Plugs needed for ECU project
Of course.
Fantastic. If you have the parts already then I'll post the design and you can build the cable.
__________________
Subaru ECU and TCU Website 1992 Alcyone SVX Version L 1992 Alcyone SVX Version L 1994 Alcyone SVX S40-II 2004 Subaru Legacy 2.5 SE Sports Tourer 1996 Subaru Legacy 2.2 GX Wagon 1988 Subaru Justy J12 SL-II |
#4
|
||||
|
||||
Re: Select Monitor Plugs needed for ECU project
Quote:
Tom |
Thread Tools | |
Display Modes | Rate This Thread |
|
|