Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
05-26-2013, 09:16 AM
|
||||
|
||||
|
Repacking Bbearings
I've read of people replacing the grease of the rear wheel bearings with high performance grease.
I just got some Timkin bearings and they look like a sealed unit. How do you change the grease? What type do you find works best?
__________________
Peter ART Cryogenic/Slotted Rotors, Stainless Steel Brake Lines, PWR Radiator, Tranny cooler, Stebro, Earthworm's Poly Differential/front & rear swaybar bushings, Koni Inserts and Mychailo SVX Sport Springs all 4 corners, Indigo Blue paint. Liquid Silver Wheels. 
|
|
#2
05-26-2013, 12:00 PM
|
||||
|
||||
|
Re: Repacking Bbearings
If its for your SVX they should not be sealed units.
They are most likely held together with a plastic sleeve that you can push out with your thumb. I always wash them completely with kerosine, repetedly, blow them out with 100psi air, wash them again with brake cleaner, blow them out again, allow them to dry, and then pack them with Advance Auto Parts Hi-Temp EP (Extreme Pressure) Grease. I have used all kinds of expencive greases, and I like the feel and reliability of the AAP stuff. By the way, I allways use way too much grease! I'd rather clean up a mess than have a bearing run dry.
__________________
www.svxfiles.com The first SuperCharged SVX,  the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway  Fiberglass Hood thread My locker 4.44 Swap link
|
|
#3
05-27-2013, 11:13 AM
|
|||
|
|||
|
Re: Repacking Bbearings
What's the Timken part number on the bearing and race? I need to buy me a set for the front.
__________________
If it ain't broken it, doesn't have enough features!!! '92 SVX LSL '03 4Runner '96 FZJ80 Landcruiser '90 Mercedes 300E
|
|
#4
05-27-2013, 11:30 AM
|
||||
|
||||
|
Re: Repacking Bbearings
Quote:
__________________
Peter ART Cryogenic/Slotted Rotors, Stainless Steel Brake Lines, PWR Radiator, Tranny cooler, Stebro, Earthworm's Poly Differential/front & rear swaybar bushings, Koni Inserts and Mychailo SVX Sport Springs all 4 corners, Indigo Blue paint. Liquid Silver Wheels. Last edited by SVX_MY_BABY; 05-27-2013 at 11:33 AM.
|
|
#5
05-27-2013, 11:11 PM
|
||||
|
||||
|
Re: Repacking Bbearings
That plastic collar in the center comes out, it's just to keep the bearing assembly together for shipping, push it out and you'll have 2 bearings and one large, 2 sided race.
|
 |
|
|
Linear Mode
