The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 11-07-2007, 08:09 PM
NiftySVX NiftySVX is offline
Registered User
 
Join Date: Sep 2002
Location: Oklahoma City, Oklahoma
Posts: 836
Send a message via AIM to NiftySVX
Pulling Motor

I am approaching 120k and would really like to yank my engine out and give it the old once over (valve cover gaskets, front seals, hoses, etc) but i really don't want to open the refrigerant system since this is never a good idea... is there a way to suspend the a/c compressor out of the way and still get the motor out? If there isn't, I will probably just do the stuff with the engine in the car. which means I will do less than i would like.
__________________
2007 GS 450h-Active Stabilizer/Radar cruise
1994 L Blue 3.70 VTD



ASE Master Automobile
ASE Advanced Level Specialist
Toyota Master Diagnostic Technician (former life)
Reply With Quote
  #2  
Old 11-07-2007, 08:14 PM
Crazy_pilot's Avatar
Crazy_pilot Crazy_pilot is offline
Moar shifty!
Subaru Gold Contributor
 
Join Date: Nov 2006
Location: Toronto, Canada. Eh?
Posts: 4,560
Send a message via MSN to Crazy_pilot
Registered SVX
I just saw a picture of that a couple days ago. You can unbolt the compressor and swing it to the side while still keeping the AC lines attached. Just be careful you don't bend anything.

Edit: Here you go, borrowed this from svx_commuter's locker:

__________________
Chris

92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping
2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos
2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold
2020 Ram 1500 Longhorn - Red Pearl


Last edited by Crazy_pilot; 11-07-2007 at 08:23 PM.
Reply With Quote
  #3  
Old 11-07-2007, 08:18 PM
AlcyoneDaze's Avatar
AlcyoneDaze AlcyoneDaze is offline
<-- custom hood ornament
 
Join Date: Nov 2006
Location: NJ
Posts: 689
Send a message via AIM to AlcyoneDaze Send a message via Yahoo to AlcyoneDaze
why such a bad idea to open up the AC system?
__________________
1992 Pearl White/Black Onyx Subaru Alcyone SVX LS-L
Donating Forum Member In Good Standing
JDM 4.11 Geared Transmission
JDM 'ALCYONE' Rear Panel
JDM 'BOXER' Eingngine Cover
JDM 'SVX' Hood Badge
L-Edition Suede Rear Seats
Reply With Quote
  #4  
Old 11-07-2007, 08:22 PM
NiftySVX NiftySVX is offline
Registered User
 
Join Date: Sep 2002
Location: Oklahoma City, Oklahoma
Posts: 836
Send a message via AIM to NiftySVX
The worst thing you can do is open the system. If you do, you have to replace the receiver/dryer as the desiccant becomes saturated from the moisture in the air in minutes, and you have to replace o-rings (which can be hard to get in the correct size) not to mention that contaminants can get in the hoses, and I don't want a clogged expansion valve or a bent compressor valve.
__________________
2007 GS 450h-Active Stabilizer/Radar cruise
1994 L Blue 3.70 VTD



ASE Master Automobile
ASE Advanced Level Specialist
Toyota Master Diagnostic Technician (former life)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122