The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 12-21-2007, 07:17 PM
Crazy_pilot's Avatar
Crazy_pilot Crazy_pilot is offline
Moar shifty!
Subaru Gold Contributor
 
Join Date: Nov 2006
Location: Toronto, Canada. Eh?
Posts: 4,560
Send a message via MSN to Crazy_pilot
Registered SVX
Inner Tie Rod Ends

I was putting on the snow tires today and did a quick front end inspection while the car was on the lift. I get a bit of play in the right front wheel, and a lot of play in the left front. Holding the outter tie rod end while someone else shook the wheel showed the outter to be fine, so it's the inner.

How much of a pain are those to change? I'll be tackling it in Jan/Feb, with the help of one of the mechanics at work, who is a front end and alignement specialist. I figure he should be able to get me through any tough spots, but are there any specific SVX things I should watch out for?
__________________
Chris

92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping
2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos
2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold
2020 Ram 1500 Longhorn - Red Pearl

Reply With Quote
  #2  
Old 12-21-2007, 07:26 PM
svxfiles's Avatar
svxfiles svxfiles is offline
There's a storm coming.
 
Join Date: Dec 2001
Location: Wiley Ford WV
Posts: 8,650
Significant Technical Input Registered SVX
If you have a lift, (and Subaru parts,) its not bad at all!
__________________
www.svxfiles.com
The first SuperCharged SVX,
the first 4.44 gears,
the first equal length headers,
the first phenolic spacers,
the first Class Glass fiberglass hood,
the first with 4, 4.44s in his driveway


Fiberglass Hood thread
My locker
4.44 Swap link
Reply With Quote
  #3  
Old 12-22-2007, 05:02 AM
SomethingElse's Avatar
SomethingElse SomethingElse is offline
word words wording
 
Join Date: Jun 2005
Location: CO
Posts: 1,387
Send a message via AIM to SomethingElse Send a message via MSN to SomethingElse
your should get the proper tool for removing and installing the inner tie rod. ebays got them for around 50 bux i think. you may want to invest in a boot as well, sometimes they dont want to come off willingly and even if they do they may deform causing popping noise when turning. And if you can afford it do both to save yourself another alignment in the near future.

oh yeah dont be suprised when you see power steering fluid in the boot. Ive done 4 sets of inner tie rods and every single time the racks were leaking. have a great day
__________________
Eric

Rebuilt P/S pump info... http://www.subaru-svx.net/forum/showthread.php?t=50918

If your car wont start info... http://www.subaru-svx.net/forum/show...ighlight=click
Reply With Quote
  #4  
Old 12-22-2007, 12:15 PM
Crazy_pilot's Avatar
Crazy_pilot Crazy_pilot is offline
Moar shifty!
Subaru Gold Contributor
 
Join Date: Nov 2006
Location: Toronto, Canada. Eh?
Posts: 4,560
Send a message via MSN to Crazy_pilot
Registered SVX
Cool thanks guys.

Eric, I'm not worried about being short tools. The guy at work is a front end steering/suspension/alignement specialist, so he'll have everything I need. I'll have to buy him a case of beer to get him ti help, but that's money well spent.

I'll probably go in for inners, outters, and boots. Preventative work, since everything is old and rusty. Are there any seals that I can do easily while I'm there?
__________________
Chris

92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping
2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos
2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold
2020 Ram 1500 Longhorn - Red Pearl

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122