SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Started building a new project
The body (whats left of it) is a 1917 Dodge Brothers Touring Sedan. Not sure yet if I just want to use the front or use the back bucket and weld it to the front cowl so I can have suicide doors. The frame is from Speedwaymotors.com I am ordering a spring behind front axle and the rear coil over set to mount the rearend this week. Hoping to have a rolling frame soon. Rearend is a 411 posi out of a 69 Nova. Also have a 69 350 that needs a rebuild. Well anyway, here is the start of my new rod in the making.
|
#2
|
||||
|
||||
Ya going to build a "Rail Job" like the one in Hollywood Nights? If you havent seen it, I recommend you do. It's like Porky's, only with a bunch of really sweet cars.
|
#3
|
|||
|
|||
Man
Thats an old movie. Yeah I remember it. I'm old too. lol
Well unless the SVX throws a wrench into my plans, I should have the front axle assy along with spindles and disk brakes in the mail soon. I'm hoping to have a rolling chassis in a month here. Will keep posting pictures for those of you that are interested. |
#4
|
||||
|
||||
From the pics it looks like you need to work that body a bit, but atleast the rust hasn't killed it. Is it gonna be a ratrod or are you going for bling?
Looks like a lot of fun. I wish I could take on a rod project, but I never know when I'm gonna pack up and run. I know I'm losing my nice big garage in the fall anyway, Good luck!
__________________
-Mike ECUTune2v7 - 4.11 5 Speed - Sprung 6 Puck Clutch - D&S Rotors - SS Brake & Clutch Lines - HKS Panel Filter - HeaderBack Exhaust -80GB Hard Drive - GroupN Engine Mounts - - some other "tricks"
[SIGPIC][/SIGPIC] In progess: track down mystery noise <-identified, paint the new dash, get better pic Spring plans: Replace Trans - Integrate ECU with the carputer - Suspension - Go back to STI Filter - Paint? Maybe not - Next Oil change: Purolator L30165 Member #995 | My Locker | My New Locker Catch you next at: ? Auto-X ? |
#5
|
|||
|
|||
Well
I'm doing a nice Rat Rod. Wont be lots of chrome because it's way to spendy. I'm trying to make this as cheap as possible. Sofar I have this in it:
175.00 for the frame tires and rims have been in my barn for 3yrs from a barter deal body was free, about 40.00 in gas and ½ a day to get it out of the field traded a wide tire kit for a Harley for the 411 posi and 300.00 so I guess right now I'm about even. I already have a 350 that needs to be freshened up and that was a freebee after I found a stoker and help get it out of the car and in my cousins. I ordered front behind spring axle, spindles and disc brake kit along with rear links and coil over shock kit. That is about 1400.00 The tin that I need to weld into the body is coming from the parts 85 XT I have. and whatever else I can use out of it like maybe the bucket seats. So I guess it may have to be registered as a 1917 DXT Bucket. |
#6
|
|||
|
|||
Woo Woo!
UPS stopped by today
|
#7
|
||||
|
||||
Quote:
Chrome don't get you home!! Some of my best 'creations' had no chrome at all!! I built my 47 Dodge pu for under $1000. and have driven it over 100K in the last 20 years! Had it over to visit svxfiles last nite!! Jerry
__________________
I'm not a REDNECK! I am an Appalachian-AMERICAN!! "Can't go to work today. The 'voices' said to "Stay home and clean the guns". Most famous Red-Neck last words... " Hey Everybody, Watch This!!) http://s306.photobucket.com/albums/nn272/subi-crosser/ Jerry |
#8
|
||||
|
||||
Quote:
$1000 bought a lot more in 1985
__________________
.Karl. Southwest members, click here to check in!CA,NV,AZ,UT,NM,OR,CO Wanted...your busted SVX! Watch out Earl, I'm comin to getchya Return of the Pissed Platypus! X2 My dream (other than a pearlie) 1.8 SVXi and a laguna blue spoiler...somewhere I decided to quit drinking, but I didn't like it so I quit not drinking. |
#9
|
|||
|
|||
Well
Thats 548.00 worth of parts right there. lol
They back ordered my front axle and spindles and the rear tires are not here yet either. Thats ok thou, I have to cut leaf spring perches and a couple other brackets off the rear end housing before I can start mounting my panbar and shocks. Wish I had a plasma cutter. Chop saw wheel on my hand grinder here I come. |
#10
|
||||
|
||||
good luck i stoped doing MN rust body restores years ago.... its just too much work for me... when are you going to have it on the road? hope to see you around MN
__________________
- John ASE certified Master Tech W/ X1 Twin City Fleet repair, St. Paul, MN need work done? Have tools will travel
|
#11
|
|||
|
|||
Well
I hope to have it on the road next summer.
|
#12
|
|||
|
|||
Update
Did some placing and welding this weekend:
|
#13
|
|||
|
|||
Hows this
looking sofar?
|
#14
|
||||
|
||||
I know I would have...
admit it, you've already put the stool in there and made the vroom noises thinking of all the places you'll be taking it to show off... the lake, the bar, the drive in.
...vroom vroom. Looks good.
__________________
-Mike ECUTune2v7 - 4.11 5 Speed - Sprung 6 Puck Clutch - D&S Rotors - SS Brake & Clutch Lines - HKS Panel Filter - HeaderBack Exhaust -80GB Hard Drive - GroupN Engine Mounts - - some other "tricks"
[SIGPIC][/SIGPIC] In progess: track down mystery noise <-identified, paint the new dash, get better pic Spring plans: Replace Trans - Integrate ECU with the carputer - Suspension - Go back to STI Filter - Paint? Maybe not - Next Oil change: Purolator L30165 Member #995 | My Locker | My New Locker Catch you next at: ? Auto-X ? |
#15
|
|||
|
|||
Oh Come On!!!
You really think I would do that, give me a break.... lol
I did one better, wait till I get done photo chopping the couple of pictures I took. |
|
|