SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
a few trannie swap Q's
i'm getting ready to put a legacy 4eat into my svx next week will the stock axels fit into this transmission, and is the speedo in sxv.s cable driven or electric, any other common issues i need to worry about, aside from the matching rear diff have that
__________________
1991 xt6 eg33? 1993 gc track car |
#2
|
||||
|
||||
The axles fit
The speed sensors are different, but attach to the same spot on the trans, you'll need to remove the electronic sender from the top/right of the front diff and put it where the speedo cable went on the Leg
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#3
|
||||
|
||||
Also, I sort of remember having to swap dipstick tubes, but I'm not sure which swap that was during, so check that out.
You'll want to use the SVX TC, but since the SVX trans was fried, at minimum you'll want to flush it out very well.
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#4
|
|||
|
|||
Quote:
__________________
1991 xt6 eg33? 1993 gc track car |
#5
|
||||
|
||||
Quote:
A 4.44 TQ is ok with a 4.44 trans, but I would bet money a 4.11 TQ wont last very long at all.
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#6
|
|||
|
|||
Quote:
TZ102ZACAA-DR 161263 I CAN'T FIND ANY THING ON THIS TRANNIE, SIGNS POINT TO IT BEING A 4.44, BUT IT MAY BE A 4.11 it's going in monday so i could really use the info because i have no clue
__________________
1991 xt6 eg33? 1993 gc track car |
#7
|
||||
|
||||
Quote:
Did you get the diff from the same car? Or, did you pull a 4.11 rear from another car?
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#8
|
||||
|
||||
To use the Legacy TC, you'll need a Legacy flexplate....just FYI.
And you HAVE to pull the gears out of the rear diff, so count the teeth on the ring gear, and divide that number by the number of teeth on th epinion gear, and that is the Gear ratio... (since you already told me that the tranny and rear diff came out of the same car) And make SURE the TC is seated all the way befoe installing the tranny
__________________
Huck Subaru Ambassador 92 SVX LS-Tour Magnaflow Exhaust, 5-Spd-AWD 88 XT6 AWD 5-Speed "Bride of FrankenWedge" 15 Impreza Premium Sedan 15 Crosstrek XV 5-Speed My 5-Speed "How-To" Write-up 1976 Pontiac Firebird Formula Current Count of Subaru's Owned.... "70" |
Thread Tools | |
Display Modes | |
|
|