SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#136
|
|||
|
|||
Re: how to change ignition light colors
working on these since I am irritated as hell with the viper and I might as well do something with the torn apart car while I think and take a break from the frustrating alarm system.
I installed the blue led version of the 158's for the gauges still waiting on the 74's to do the rest of the temp and open door etc. I also replaced the 158's in the door that light up when the door is open, they are blue now. I'm a little confused on which bulb areas you had to drill out marisa? can expand on which ones in particular? is it all the brass colored ones on the one side only? or did you do all of them. Anyone know what size to use for the hvac? Last edited by Johnybeas; 10-05-2009 at 10:51 PM. Reason: more questions |
#137
|
||||
|
||||
Re: how to change ignition light colors
so has anyone compiled a list of how many of what kind of LEDs to get for the total swap?
__________________
Tranny goes in, tranny comes out, tranny goes in.....AW ****, tranny comes out.... |
#138
|
||||
|
||||
Re: how to change ignition light colors
Quote:
I'm hoping I didn't damage something but not sure how to tackle or get to it since they are such a tight fit anyways. Where do the wires run? Any suggestions? Ideas?
__________________
1994 subaru svx le 112k |
#139
|
||||
|
||||
Re: how to change ignition light colors
P.S. - someone needs to do this to the needles / obtain clear ones for it...
__________________
1994 subaru svx le 112k |
#140
|
||||
|
||||
Re: how to change ignition light colors
I'll say it again, if you want clear needles just remove the orange/red paint from the back of them.
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress |
#141
|
||||
|
||||
Re: how to change ignition light colors
ok lets revive this since i barely pulled my gauge cluster out... all those bulbs on the bakc of the cluster i want to change them to led white ones... there are 4 big ones, 9 smalls ones, and 2 medium ones on the sides.. what would the size be for each of these and which ones would be the best to order? thanks. i want to make the color purple.
|
#142
|
|||
|
|||
decorative
This is called a no drama velvet shoulder juicy couture outlet, the choice of refined chocolate velvet, together with the same color to juicy couture make decorative leather shoulder strap with metal ring connections, top zipper closure, including the ed hardy bathing suits crown embroidered on the front , hearts, wreaths and logo ed hardy shoes, meticulous workmanship, beautiful appearance, but also with the same color quilted coin gucci belt practical convenience.
|
#143
|
||||
|
||||
Re: how to change ignition light colors
I wonder why this spaaaaaaaammmm is geared to women on a car forum. Whoever set it is an idiot.
__________________
1992 Pearl White LS-L "Ruslana" #4946 - 180k on body, 95k on engine. Mods: ECU bead crush, 15 min mod, 20 min mod, drilled/slotted rotors & Axxis ceramic brakes, SS lines, 17" Evoke F1 wheels, XS-HF137 Sony Xplod speakers, 6000k HID's (lows & fogs), resistor mod, 1½" Sleek Spoiler mod, custom exhaust by svxfiles, '02 WRX aluminum racing radiator by svxfiles, Summit Racing 400# x 300# springs w/ Koni's by svxfiles, ClassGlass fiberglass hood /w scoop, Nevin's rear sway bar, '97 grille, phenolic spacers, custom LED interior lighting, custom paint. †"War doesn't determine who is right, only who is left"† Work to be done: Tinted windows, clear/LED tail lights, tailbar mod, "Power Mode" mod, Supertone horns, clear corners & headlight lenses, 2 pc splitters or custom bumper, Alcyone side skirts, TruSpeed Stage III SVX Intake, Hydra, 4.44 tranny swap, JDM auto folding side mirrors, engine rebuild, super charger, STi seats, bone leather interior /w SVX emblem, dash overhaul, SVX decals, paint (stock color). Total cost?: 22k At least it's going down..
|
#144
|
|||
|
|||
Re: how to change ignition light colors
wtf.....................Spamtacular.
I dunno if you guys noticed a post I did a while back about doing completely new gauges with adjustable color... we won't have to have any more crazy DIY attempts that don't look as professional as we'd like them to... All I need are 5-9 people to come to a compromise on what they'd want in the gauges and I could have them done in a few weeks. sweeping gauges needles that light to a choice of color led back lit (choice color) and even manual set for those of us who no longer have an auto trans. This is something I'm not going to have to play games with a manufacturer about like with the CAI's, for those of you who are worried that this would take forever. The company that would be making them is US Speedo link It would be a complete replacement cluster, so no toying with pulling off your needles and not having them go back on correctly. Just pull out the gauge cluster and replace. If anyone is interested in this let me know. I'm not posting this to draw the trolls or thread jack just merely offering up another option for changing our interior colors. Also I just need people to commit to purchase by signing a purchase order, but the funds would not be collected until the product is complete to avoid conflict with people claiming that I ran away with their money. This would be merely a way to push the process they will be produced in time with or without initial group buy in but it would be an opportunity to save money on the gauges by getting them at a discounted rate. Last edited by Johnybeas; 10-03-2011 at 12:06 AM. |
#145
|
|||
|
|||
Re: how to change ignition light colors
What are we looking at as far as price??
|
#146
|
|||
|
|||
Re: how to change ignition light colors
http://www.subaru-svx.net/forum/showthread.php?t=57309
They will be $275 Auto Version will have tranny temp gauge and oil pressure gauge, Manual will have oil pressure and coolant temp. |
#147
|
||||
|
||||
Re: how to change ignition light colors
Is it terrible that re-reading this thread, I annoyed myself?
Why didn't I update with bulb sizes... ugh! I changed my gauge cluster with different types of red led bulbs and at one time took comparison shots.. that I clearly never posted... Now I need to know as its been so long and I think some bulbs went out. So I hop over to this thread thinking I'd remind myself only to find that I failed myself. My memory sucks sometimes... all the time.
__________________
Marisa '93 LSL Anniversary Edition - 02/93 - 150,998 Daily Driver - Forged EG33 (long block), 6MT swap, and re-upholstered interior '92 Pearl - 100k Side restoration project Locker | Old Locker | Shutterfly | ReadingIX | Facebook | Instagram |
#148
|
|||
|
|||
Re: how to change ignition light colors
Quote:
|
#149
|
||||
|
||||
Re: how to change ignition light colors
Going to try the climate control leds again. Got board and figured something out so just need to get a new soldering gun. I'll keep you updated.
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress |
#150
|
||||
|
||||
Re: how to change ignition light colors
Here's a peek so far................
__________________
Seth 94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats Soon to come:Fiberglass hood, upholster ALL suede to black leather Past subies: 92' Pearl White/black top LS-L-SOLD 96' Legacy Outback-TOTALED 99' Legacy Outback Limited 30th anniversary edition-TOTALED 98' Forester L -Totaled Other toys: 99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap 06' B9 Tribeca-Stock 1982' Yamaha xj650 Maxim Mods: work in progress |
|
|