Trunk sub boxes

[rvnmaniac]

personally.... carpeted.....

[Nomad]

Black carpet, 2 x 12'' ... pm me for price when you'll know !

[Motorsport-SVX]

I did one that can use a single 8 or 10"

http://svx-motorsport-accessories.st...t/cusuben.html

sounds great, takes up very little room
have more pics if you need.

[Gamesy]

i just started fiberglassing the box today should have it done by weeks end, school is causing a delay

[Johnybeas]

pics?

[YourConfused]

Originally Posted by Motorsport-SVX

I did one that can use a single 8 or 10"

http://svx-motorsport-accessories.st...t/cusuben.html

sounds great, takes up very little room
have more pics if you need.

Dayle, your box looks really nice, but is quite expensive. You may get some buyers if it was priced a little more reasonable. That being said though I ahve been asked to do some glass work for sub enclosures and i said no because it was too much of a hassle.

[siceclipse]

I agree but you answered yourself at the same time.

that sub looks like it would cost no more than 100 bucks if you wanted to invest the time to do the measurements and fiberglass one yourself.

[Freeman]

Actually, I wouldn't have the slightest clue where or how to have something fiberglassed. And didn't you see? Dale's is on sale! Still a bit too pricy for me though. Then again, what isn't?

[Johnybeas]

there is a link in one of the threads that tells you how to do it step by step I'll look for it later and link ya, I'll also be posting pics and detailed discription of how I do mine when I get home, should be starting in like 2 weeks prob. if not sooner I'm driving back on sat.

[Gamesy]

here's the one i made for my car

[Nomad]

prety cool ! I need one for each side and , on 12'' big ! how much !!??

[Gamesy]

500 for the pair sound good? let me know what you think

[Nomad]

yeah , sounds good ( ok so + shipping and all... ) I'm putting that in my shortcuts on my desktop and i'll give you a sign of life when i'll be ready !

[Gamesy]

ok sounds good, you have the subs already right? can you measure what the diameter and how much of a lip there is from the edge? This way i can make sure the subs fit in the ring.

[Black88GTA]

Do you have an idea of the internal volume of your enclosures? And these are sealed, right? I'm interested too

I'm looking for a sealed enclosure for a single 10" sub...a JL Audio 10W6V2. Either side of the trunk would work, although I think I'd prefer it to be on the drivers' side. Dimensions / relevant sub measurements can be found here. Ideally, I'd like total gross internal volume to be roughly 0.691 cubic feet in order to maximize sub performance, although this doesn't have to be exact.

Let me know if you don't mind making another one...