Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
10-18-2017, 10:19 PM
|
||||
|
||||
|
Fitting z32 aluminum calipers and sti rotors
    You need kns adapter Kns-010 $199 Brake caliper hardware from Toyota s12 calipers Washers for spacing (I had oem Nissan washers from original hardware that was sufficient when added to kns adapter hardware approx $20 Brake lines that fit z32 caliper Sti rotors 2005+ You have to bring a small corner of material from back of hub on upper mounting hole on svx that I used a Dremel and carbide bit. Must remove around 1/2 inch on kns adapter around mounting holes that mounts bracket to Svx hub to make it flush I used a 4.5 grinder , metal file and straight edge to ensure I did it evenly. Toyota caliper hardware lower profile than Nissan although pad design is identical and clearance to inside of wheels on 17" bbs is 1-2mm so that room is critical. Note: top 8mm or so of pad is left unused and does not contact rotor
__________________
[SIGPIC][/SIGPIC] STi BBS wheels,legacy gt 4.44, 3" catback exhaust, Stance GR+ 7k/5k, QS Teflon adjustable endlinks, Hankook EVO 245/40/17, 95-LS escaine seats, GC8 V7 steering wheel, JDM clear corners, small car clear lenses, Alcyone badge, JDM rear taillight, 97 grille, stevesby bumper, PWR radiator, Perrin Crank pulley, Urethane Swaybar bushings, urethane diff bushings, DDM 6k 55watt lows and 4500k 35watt fog lights; $15/15min mod, Motorsport whs 22mm rear swaybar, QC shift kit, ToMyx intake, z32 aluminum calipers 13" rotors, nitrous express proton + wet kit. 
|
|
|
Threaded Mode