The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 05-20-2003, 07:59 PM
elninoalex's Avatar
elninoalex elninoalex is offline
Registered Abuser
 
Join Date: Mar 2002
Location: Beaverton, OR
Posts: 1,239
Exhaust flex joints

If you remove the flex joint in front of the center cat, is it a good idea to offer some flexibility elsewhere? I replaced my center cat with an aftermarket cat and I am getting a resonant buzz between 3000 and 3500 rpm. Could the lack of flexibility be contributing? I was thinking of using those braided stainless flex couplers in front. Any thoughts?

Stephen
__________________
92 Ebony - Level 10/n2o REAR-ENDED
92 Teal - painted yellow/4.11 5spd/n2o SOLD
92 Claret - 4.44 SOLD
94 Barcelona - FWD SOLD
92 Ebony - 3.90 SOLD
94 Laguna ROLLING w/4.44s/Ecutune ECU +TCU/STI springs/Infiniti M45 rims
Reply With Quote
  #2  
Old 05-20-2003, 08:25 PM
Subafreak's Avatar
Subafreak Subafreak is offline
Superbeast
 
Join Date: Aug 2002
Location: Central Village Ct.
Posts: 4,330
When I built my first exaust I didn't have any flex points in it and I didn't have any problems. However it would seam that after a wile of working it, it would fatige the metal and break somewhere. If you have an easy place to install a flex joint then you should do it althoe I don't think it has any thing to do with your noise.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs.
91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch.
78 BRAT (New toy) (Soon to be EJ22T powered)
90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car)

To many cars to spend time on teh web!
Reply With Quote
  #3  
Old 05-21-2003, 02:20 PM
mbtoloczko's Avatar
mbtoloczko mbtoloczko is offline
sans SVX
 
Join Date: Sep 2002
Location: Richland, WA
Posts: 4,250
Send a message via AIM to mbtoloczko
Have you tracked down the source of the noise? My guess would be that its the heat shielding around the primary exhaust pipes. Maybe just a little readjustment of the heat shielding would be necessary?
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)

Visit my locker

SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
Reply With Quote
  #4  
Old 05-21-2003, 04:39 PM
elninoalex's Avatar
elninoalex elninoalex is offline
Registered Abuser
 
Join Date: Mar 2002
Location: Beaverton, OR
Posts: 1,239
Actually the car contains no heat shields, other than the integral one on the new center cat. Which is probably the culprit. It has straight pipes from the manifolds back to the center cat. It really sounds great, except for that dang buzz.
__________________
92 Ebony - Level 10/n2o REAR-ENDED
92 Teal - painted yellow/4.11 5spd/n2o SOLD
92 Claret - 4.44 SOLD
94 Barcelona - FWD SOLD
92 Ebony - 3.90 SOLD
94 Laguna ROLLING w/4.44s/Ecutune ECU +TCU/STI springs/Infiniti M45 rims
Reply With Quote
  #5  
Old 05-21-2003, 11:54 PM
elninoalex's Avatar
elninoalex elninoalex is offline
Registered Abuser
 
Join Date: Mar 2002
Location: Beaverton, OR
Posts: 1,239
That darn cat

Actually, I should say that I do have the heat shields on the manifolds. Anyway, the new cat had a few spot welds that let go so I welded it all the way around the perimeter and now most of the noise is gone. I may end up just removing the heat shield altogether if it keeps bugging me, which it probably will.

Stephen
__________________
92 Ebony - Level 10/n2o REAR-ENDED
92 Teal - painted yellow/4.11 5spd/n2o SOLD
92 Claret - 4.44 SOLD
94 Barcelona - FWD SOLD
92 Ebony - 3.90 SOLD
94 Laguna ROLLING w/4.44s/Ecutune ECU +TCU/STI springs/Infiniti M45 rims
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122